BowieReefer84 July 11, 2016 July 11, 2016 Picked up a IM Nuvo 40 and custom stand off a fellow member. I also just ordered a Ocean Revive T247 light. I wanted something like an ATI with Reefbrites, but the price point wasn't working for me. Going to do my best to keep to a budget on this tank. I still need power heads, which I am thinking Jebao PP pumps. Also, all the misc items. Hoping to get the tank going with rock in the next few weeks, then let it ride for a couple months without adding any livestock. Just happy to be back in the hobby for now.
madweazl July 12, 2016 July 12, 2016 (edited) I just got a PP8 (ordered an RW8 but I cant find anything to differentiate the two) and am pretty happy. The only bummer is how much real estate they occupy in tank. It isnt audible with my ear up to the glass at full power and the flow is much wider than the WP25 that is on the opposite side of the tank. Night mode and master/slave both get disabled when the power goes out and doesnt seem to come back on unless you hit the buttons again. This is currently an issue for me as I have them hooked up to a relay on the controller (have to order the dimming expansion and Jebao cables) that is alternating power between the boxes every 45 seconds. The WP works like normal but the RW/PP controller doesnt. Ramifications of using something in a manner not intended. Edited July 12, 2016 by madweazl
BowieReefer84 July 14, 2016 Author July 14, 2016 Going to paint the stand black. Thinking about using chalkboard paint for fun. The light is an Ocean Revive. I went with it after seeing one of the nicest tanks on here run by Cliffpuckstable. He doesn't know he's the reason, but now he might. I want some nice rock, but not sure where I will get that. Might check local stores to cherry pick dry rock. IMG_4208 by mteske1, on Flickr IMG_4211 by mteske1, on Flickr IMG_4239 by mteske1, on Flickr IMG_4240 by mteske1, on Flickr IMG_4242 by mteske1, on Flickr Going to hang the light once the tank is in final position.
aquamom July 15, 2016 July 15, 2016 I also have the Ocean Revives and so far I am very happy with them. I decided after seeing them over all of the corals tanks at Pacific East.
BowieReefer84 July 24, 2016 Author July 24, 2016 3 coats down, and prob two more to get it really well covered. The chalkboard paint worked really nicely. The finish is not perfect up close, but once the tank is stocked it won't matter. image1 by mteske1, on Flickr image2 by mteske1, on Flickr
Cliff Puckstable July 26, 2016 July 26, 2016 I'm cliff puckstable and I endorse this build. Making Wamas great again.
s2nhle July 28, 2016 July 28, 2016 I'm cliff puckstable and I endorse this build. Making Wamas great again. LOL. Let's hope so.
BowieReefer84 July 28, 2016 Author July 28, 2016 Don't let anyone ever tell you that WAMAS isn't great, that somehow we need to make it great again. Because this, right now, is the greatest forum on earth. (applause)
YHSublime July 28, 2016 July 28, 2016 I'm cliff puckstable and I endorse this build. Making Wamas great again. Don't let anyone ever tell you that WAMAS isn't great, that somehow we need to make it great again. Because this, right now, is the greatest forum on earth. (applause) :laugh:
BowieReefer84 July 30, 2016 Author July 30, 2016 One step closer. IMG_4450 by mteske1, on Flickr IMG_4452 by mteske1, on Flickr
BowieReefer84 August 4, 2016 Author August 4, 2016 I went with the Reef Saver rock off BRS. It was on sale for $2.33/lb. I also ordered salt (instant ocean). I want to go with a starboard bottom, and need to find a good place to get that.
AlanM August 4, 2016 August 4, 2016 I went with the Reef Saver rock off BRS. It was on sale for $2.33/lb. I also ordered salt (instant ocean). I want to go with a starboard bottom, and need to find a good place to get that. Nice. Take some pics once you get the rock. I need to decide on what dry rock to get. I keep being tempted to get Tampa Bay Saltwater, but can't quite bring myself to be ok with the price.
Reefoholic August 5, 2016 August 5, 2016 (edited) I went with the Reef Saver rock off BRS. It was on sale for $2.33/lb. I also ordered salt (instant ocean). I want to go with a starboard bottom, and need to find a good place to get that. What is a starboard bottom? Benefits? Edited August 5, 2016 by Reefoholic
YHSublime August 5, 2016 August 5, 2016 What is a starboard bottom? Benefits? It's almost like that thin cutting board material (plastic) that folks will silicone down to the bottom of the tank, and usually coat it with epoxy and sprinkle sand on it to make a false bottom. It provides the aesthetics of looking like you have sand, but are essentially running a bare bottom tank.
AlanM August 5, 2016 August 5, 2016 It's almost like that thin cutting board material (plastic) that folks will silicone down to the bottom of the tank, and usually coat it with epoxy and sprinkle sand on it to make a false bottom. It provides the aesthetics of looking like you have sand, but are essentially running a bare bottom tank. Yep. Usually made of HDPE, I think, and often white, but available in other colors. It turns your bare bottom tank from being glass, which can be a little slippery to stack up rocks on and can look weird with reflections, into a non-reflective surface which gives you some protection from cracks in the event of a rock fall as well. I have no idea why it is called starboard. Maybe it actually a trade name that comes from it's frequent use on boats as a building material?
Reefoholic August 5, 2016 August 5, 2016 It's almost like that thin cutting board material (plastic) that folks will silicone down to the bottom of the tank, and usually coat it with epoxy and sprinkle sand on it to make a false bottom. It provides the aesthetics of looking like you have sand, but are essentially running a bare bottom tank. I like that idea! Are there any bio-benefits to that? Yep. Usually made of HDPE, I think, and often white, but available in other colors. It turns your bare bottom tank from being glass, which can be a little slippery to stack up rocks on and can look weird with reflections, into a non-reflective surface which gives you some protection from cracks in the event of a rock fall as well. I have no idea why it is called starboard. Maybe it actually a trade name that comes from it's frequent use on boats as a building material? Should it be edge-to-edge? I am afraid that after the addition of the starboard, the pressure points might change and result in a crack underneath.
BowieReefer84 September 13, 2016 Author September 13, 2016 Progress is slow but steady. Hooked up my water making station (told the wife I needed to build new shelves haha). Have the rock and sand, so hopefully will get it filled this weekend. Keeping the rock simple and away from front and side glass. I always regret not leaving more room on the edges. IMG_4929 by mteske1, on Flickr IMG_4897 by mteske1, on Flickr FullSizeRender by mteske1, on Flickr
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now