AlanM March 26, 2013 Share March 26, 2013 I love d2mini's setup that you posted the pics of. I aspire to do that on my RO/DI and SW systems. I think he used these, right? http://www.usplastic.com/catalog/item.aspx?itemid=25328 Moniiboy, since you're the group-buy master, I wonder if a group buy from US plastics would net any cheaper shipping. Maybe not because they drop ship? I think I'd like a couple of those 40 gallon applicator tanks, and maybe one of these stock tanks: http://www.usplastic.com/catalog/item.aspx?itemid=23947&catid=957 and a few space saver jugs for dosing chemicals: http://www.usplastic.com/catalog/item.aspx?itemid=25129&catid=611 and maybe some acrylic sheet to make an overflow box: http://www.usplastic.com/catalog/item.aspx?itemid=23901&catid=442 Link to comment Share on other sites More sharing options...
DCReefer1964 March 27, 2013 Share March 27, 2013 This is like reading a Star Trek script. Keep up the good work CDR Data! Tagging along. Link to comment Share on other sites More sharing options...
swimmatte March 28, 2013 Share March 28, 2013 Got to see this project in person today. That tank is a MONSTER. Good luck with the build man and let me know if you ever need any help. I'll get you some info on those containers shortly. Link to comment Share on other sites More sharing options...
monkiboy April 2, 2013 Author Share April 2, 2013 (edited) trying to get a lot done today. running an additional 12-3 line to add some GCFIs on separate breakers. looking to have at least three of four 15-20A quad boxes in the fish room and under the tank. did a final skim coat, sanded, and primed: then started breaking down the existing fish room to be able to demo the wall to allow access behind the 265. with the sump removed and fish filtration goodies out of there, time to knock down some wall! Edited April 2, 2013 by monkiboy Link to comment Share on other sites More sharing options...
monkiboy April 2, 2013 Author Share April 2, 2013 (edited) do i need to kilz/waterproof my stand? about to get the existing sump for the upstairs back up and running temporarily and the 265 on the stand. also, can i use this stuff on top of the stand. about .5" thick and perfect size or should i go get some foam insulation sheet at HD and in what measurement? quick answers appreciated! how thick is required or needed for a tank this size? the whole point is just to eat up some, if any, of the unlevel-ness over time, yes? also, should i remove the lower trim from the tank. it is not structurally doing anything. it does not have any bracing crossing the bottom pane. it is just a square frame trim. didn't know if having no trim and an edge to sit on would be better to allow the entire lower pane to absorb the force/pressure vs just having the edge/border of the trim taking it all as it lifts the tank by about .5" immediate thoughts appreciated. thanks! Edited April 2, 2013 by monkiboy Link to comment Share on other sites More sharing options...
ridetheducati April 2, 2013 Share April 2, 2013 DO NOT use any foam under the tank. Ensure the stand is level (1/16" tolerance). 1/4" pink foam is sometimes used to compensate for irregularities in the top wood panel, not for leveling. Link to comment Share on other sites More sharing options...
AlanM April 2, 2013 Share April 2, 2013 Gee, when you are ready to go, you go. I would think removing the bottom trim is a bad idea, but dont know exactly why. The weight is engineered to be held up by that trim, though, not by the bottom pane of glass. Link to comment Share on other sites More sharing options...
ridetheducati April 2, 2013 Share April 2, 2013 Gee, when you are ready to go, you go. I would think removing the bottom trim is a bad idea, but dont know exactly why. The weight is engineered to be held up by that trim, though, not by the bottom pane of glass. +1. I forgot to address the other question. I recommend not removing the bottom trim. Link to comment Share on other sites More sharing options...
sachabballi reef April 2, 2013 Share April 2, 2013 i can't believe how fast you are moving along...this is amazing!!! are you doing this by yourself or do elves come out at night? LOL looks fantastic...I can't wait until this tank is set up...have a feeling it is going to be spectacular Link to comment Share on other sites More sharing options...
monkiboy April 2, 2013 Author Share April 2, 2013 thanks tony and alan, ok so definitely nothing but the stand under the tank - no foam or insulation sheething. the bottom trim intact. about to move this thing and don't want to have to do it twice. stand is absolutely perfectly level but thought folks used the insulation, like you mentioned, for stand/wood settling with DIY stands and that i might benefit since i have seen a lot of builds on here with it. but i trust your judgement completely, so i'll go without. thanks for the quick replies. Link to comment Share on other sites More sharing options...
flooddc April 2, 2013 Share April 2, 2013 looking good...great progress! Link to comment Share on other sites More sharing options...
steveoutlaw April 2, 2013 Share April 2, 2013 Very nice.......loving the progress. Keep the pics coming!! Link to comment Share on other sites More sharing options...
ridetheducati April 2, 2013 Share April 2, 2013 Be aware, the stand may appear level now, but with adequate weight applied it may not be level. Can you further level the stand when the tank is half full? Forgive me for asking the next question, because I know the answer, but you are using at least a four foot level? Link to comment Share on other sites More sharing options...
Der ABT April 2, 2013 Share April 2, 2013 (edited) nvm not sure why but it was a few posts behind and already anwsered very nice progress Edited April 2, 2013 by Der ABT Link to comment Share on other sites More sharing options...
monkiboy April 2, 2013 Author Share April 2, 2013 Be aware, the stand may appear level now, but with adequate weight applied it may not be level. Can you further level the stand when the tank is half full? Forgive me for asking the next question, because I know the answer, but you are using at least a four foot level? of course not. i'm using a torpedo - 12". Link to comment Share on other sites More sharing options...
monkiboy April 2, 2013 Author Share April 2, 2013 have a lot more to update but got to get these evergrow LED lights in the truck and out to tysons pick up point! Link to comment Share on other sites More sharing options...
DaveS April 2, 2013 Share April 2, 2013 I used the same foam under my tank. Actually it wasn't the cool manly steel grey but the blue, green, red one for kids. Not sure it does anything but doesn't hurt either. I would agree that the stand can settle over time. I don't think it started out that way but at some point my tank leaned back from the wall and needed to be lifted about 3/8" of an inch. Coral Hind and I drained about 20% and then used a car jack with some shims. I was sweating bullets but it worked just fine. Link to comment Share on other sites More sharing options...
MBVette April 3, 2013 Share April 3, 2013 I've got those same colored pads under my tank as well. Who knew so many of us used them. Lol Link to comment Share on other sites More sharing options...
ExoticReefCreations April 3, 2013 Share April 3, 2013 Lookin great! If you need a hand don't hesitate to give me a ring Link to comment Share on other sites More sharing options...
AlanM April 3, 2013 Share April 3, 2013 Rght. If you want help lifting that tank up during the day some day let me know. Evenings are harder when on kid duty, but the taxpayers can pay for a drive to silver spring some day. Link to comment Share on other sites More sharing options...
monkiboy April 3, 2013 Author Share April 3, 2013 Got to see this project in person today. That tank is a MONSTER. Good luck with the build man and let me know if you ever need any help. I'll get you some info on those containers shortly. looking good...great progress! Very nice.......loving the progress. Keep the pics coming!! nvm not sure why but it was a few posts behind and already anwsered very nice progress Lookin great! If you need a hand don't hesitate to give me a ring Rght. If you want help lifting that tank up during the day some day let me know. Evenings are harder when on kid duty, but the taxpayers can pay for a drive to silver spring some day. thanks for the offers of help and comments - i appreciate the support and enthusiasm. keeps me going! Link to comment Share on other sites More sharing options...
RJT April 3, 2013 Share April 3, 2013 Excellent build progress, truly a man on a mission. PM if you need any help. Link to comment Share on other sites More sharing options...
monkiboy April 3, 2013 Author Share April 3, 2013 DO NOT use any foam under the tank. Ensure the stand is level (1/16" tolerance). 1/4" pink foam is sometimes used to compensate for irregularities in the top wood panel, not for leveling. thank you, i ditched the idea. +1. I forgot to address the other question. I recommend not removing the bottom trim. thank you - left it in place. Gee, when you are ready to go, you go. I would think removing the bottom trim is a bad idea, but dont know exactly why. The weight is engineered to be held up by that trim, though, not by the bottom pane of glass. haha, i can't sit around and see my basement a mess like that and with such an exciting project - i'm all go-go-go! thanks for the advice - i left the bottom trim in place. i can't believe how fast you are moving along...this is amazing!!! are you doing this by yourself or do elves come out at night? LOL looks fantastic...I can't wait until this tank is set up...have a feeling it is going to be spectacular thank you - i'm excited to get her wet, ready, and cycled for sure! no, i'm not a lone ranger on this project - my dad helps. we conquer a lot of projects together. he's owns a design/build firm and is a general contractor so i learned a lot growing up working with/for him, which helps a ton in these kinds of endeavors as one would imagine. Be aware, the stand may appear level now, but with adequate weight applied it may not be level. Can you further level the stand when the tank is half full? Forgive me for asking the next question, because I know the answer, but you are using at least a four foot level? thanks for the heads up and call. i'm planning on filling up halfway for a few days, let things settle and reassess how things are. good input. I used the same foam under my tank. Actually it wasn't the cool manly steel grey but the blue, green, red one for kids. Not sure it does anything but doesn't hurt either. I would agree that the stand can settle over time. I don't think it started out that way but at some point my tank leaned back from the wall and needed to be lifted about 3/8" of an inch. Coral Hind and I drained about 20% and then used a car jack with some shims. I was sweating bullets but it worked just fine. yes, i saw that in your build thread which is where i got the idea to use my garage matting instead of the insulation sheet. good to hear about another experience with settling. glad you were able to get it rectified! Link to comment Share on other sites More sharing options...
monkiboy April 3, 2013 Author Share April 3, 2013 Excellent build progress, truly a man on a mission. PM if you need any help. thank you for the offer, sir! Link to comment Share on other sites More sharing options...
monkiboy April 3, 2013 Author Share April 3, 2013 sliding her from her resting spot to the opening with some 3" and 4" PVC pipe i had laying around... getting ready to put her in place. thankfully i had another strong soul visiting and between the three of us we got her up and in her final destination. don't know if just me and my dad could of done it without the extra muscle so that was a swell surprise. tank is in, trim work done, baseboard and bullnose, just needs some mud tonight and i'll skim tomorrow. got the existing sump running temporarily while i figure out design of the layout in the room, figure out the water storage, etc. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now