Denis October 29, 2018 Share October 29, 2018 Fantastic photos!! Looking good brotha! Link to comment Share on other sites More sharing options...
YHSublime October 29, 2018 Author Share October 29, 2018 Fantastic photos!! Looking good brotha! Thank you, sir! Link to comment Share on other sites More sharing options...
YHSublime November 4, 2018 Author Share November 4, 2018 Check out the fire on this base! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
YHSublime December 18, 2018 Author Share December 18, 2018 Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Sharkey18 December 20, 2018 Share December 20, 2018 Those photos are amazing! Are you using a lens tube? (The thing that you attach that lets you get into the water)? Link to comment Share on other sites More sharing options...
YHSublime December 20, 2018 Author Share December 20, 2018 52 minutes ago, Sharkey18 said: Those photos are amazing! Are you using a lens tube? (The thing that you attach that lets you get into the water)? Thanks for checking in! I wasn't sure if this was on the radar anymore! The ones in October (pretty much one page back) are all with an avast spyglass tube, but all other photos have been with the flow off from the top, or with my iPhoneX. It's been a while since I've had a real go at trying to take photos. I don't have a lot of distance here, and I need a macro-macro lens to get real close and dirty! Link to comment Share on other sites More sharing options...
D805 December 20, 2018 Share December 20, 2018 Looking good. Digging the GSP on the floor. How close to the rock is the GSP? That stuff spread like wildfire, but you know that. lol Link to comment Share on other sites More sharing options...
YHSublime December 20, 2018 Author Share December 20, 2018 30 minutes ago, D805 said: Looking good. Digging the GSP on the floor. How close to the rock is the GSP? That stuff spread like wildfire, but you know that. lol Thanks! The GSP comes right up to the rock. I'm constantly trimming it back. It started as just a plug I threw into the corner a year ago to figure out what I was going to do with it later, and then I liked the way it started matting. Now It's kind of like a lawn. I'm breaking down the nem rock in the back, and hope to push everything back a bit, and add another SPS rock. We will see. There has been a lot of growth and changes that I just haven't updated. Link to comment Share on other sites More sharing options...
YHSublime December 21, 2018 Author Share December 21, 2018 Some updated shots! Link to comment Share on other sites More sharing options...
YHSublime December 27, 2018 Author Share December 27, 2018 New home made dosing containersSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
WheresTheReef December 27, 2018 Share December 27, 2018 New home made dosing containersSent from my iPhone using TapatalkAre those voss water bottles? I made some just like that and they work great. Link to comment Share on other sites More sharing options...
YHSublime December 27, 2018 Author Share December 27, 2018 Are those voss water bottles? I made some just like that and they work great.Yup, the glass ones! Better than the plastic milk jugs I was using!Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
epleeds December 27, 2018 Share December 27, 2018 That’s awesome!! Link to comment Share on other sites More sharing options...
skillz_dat_killz December 27, 2018 Share December 27, 2018 Those are some L-E-G-I-T dosing containers!! Link to comment Share on other sites More sharing options...
YHSublime December 27, 2018 Author Share December 27, 2018 1 hour ago, epleeds said: That’s awesome!! 4 minutes ago, skillz_dat_killz said: Those are some L-E-G-I-T dosing containers!! After some quick research, with the mur-lok bulkheads and some acrylic rods, you can turn any container into a dosing container! Link to comment Share on other sites More sharing options...
YHSublime January 2, 2019 Author Share January 2, 2019 Well, I found out that the acrylic tubing I bought for the dosing containers doesn't hold a prime. Works great with the RO tubing though. Defeats the purpose of a DIY project, as my intention was to rid the curled tube into the container. How did I find out? Well, good thing I test my alk daily. I thought my consumption was going up with the recent addition of a tiny clam, so for two days I upped the 2 part by 2ml, and alk was still progressively dropping. Last night I checked a manual run through of the pumps, and the prime on them was completely gone. Just glad I was home to catch it. Link to comment Share on other sites More sharing options...
Origami January 2, 2019 Share January 2, 2019 2 hours ago, YHSublime said: Well, I found out that the acrylic tubing I bought for the dosing containers doesn't hold a prime. Works great with the RO tubing though. Defeats the purpose of a DIY project, as my intention was to rid the curled tube into the container. How did I find out? Well, good thing I test my alk daily. I thought my consumption was going up with the recent addition of a tiny clam, so for two days I upped the 2 part by 2ml, and alk was still progressively dropping. Last night I checked a manual run through of the pumps, and the prime on them was completely gone. Just glad I was home to catch it. Sounds like an air-leak through your peristaltic pump, which can happen with pumps that don't have many rollers and can stop in an unsealed state or if your connections are not air-tight. Could you address the problem with a small checkvalve? Link to comment Share on other sites More sharing options...
WheresTheReef January 2, 2019 Share January 2, 2019 Well, I found out that the acrylic tubing I bought for the dosing containers doesn't hold a prime. Works great with the RO tubing though. Defeats the purpose of a DIY project, as my intention was to rid the curled tube into the container. How did I find out? Well, good thing I test my alk daily. I thought my consumption was going up with the recent addition of a tiny clam, so for two days I upped the 2 part by 2ml, and alk was still progressively dropping. Last night I checked a manual run through of the pumps, and the prime on them was completely gone. Just glad I was home to catch it. I got my acrylic rod and bulkhead from BRS and they work just fine together for me on 3 different containers. In fact I can't pull the rod out once inserted. Seems like it's losing the seal somewhere. Either at the doser or a connection. If at the rod/bulkhead connection, then maybe it's missing the o-ring. Worst case you can probably put some silicone to seal up the bulkhead-tube connection.https://www.bulkreefsupply.com/1-4-push-connect-bulkhead-tank-adapter.htmlhttps://www.bulkreefsupply.com/1-4-clear-acrylic-tube-16-long.html Link to comment Share on other sites More sharing options...
YHSublime January 2, 2019 Author Share January 2, 2019 2 minutes ago, Origami said: Sounds like an air-leak through your peristaltic pump, which can happen with pumps that don't have many rollers and can stop in an unsealed state or if your connections are not air-tight. Could you address the problem with a small checkvalve? I actually reached out to BRS and ended up talking to Chad. He told me that the 1/4" acrylic tubing is actually just small enough that it doesn't connect without really jamming it in there. Then of course, if you jostle, move, whatever, it has the issue of coming undone. He suggested some lubrication gel, and I figured I could just superglue them tight, but I'm wary of trying that and then traveling and having issues while I'm gone. Link to comment Share on other sites More sharing options...
YHSublime January 2, 2019 Author Share January 2, 2019 1 minute ago, WheresTheReef said: I got my acrylic rod and bulkhead from BRS and they work just fine together for me on 3 different containers. In fact I can't pull the rod out once inserted. Seems like it's losing the seal somewhere. Either at the doser or a connection. If at the rod/bulkhead connection, then maybe it's missing the o-ring. Worst case you can probably put some silicone to seal up the bulkhead-tube connection. https://www.bulkreefsupply.com/1-4-push-connect-bulkhead-tank-adapter.html https://www.bulkreefsupply.com/1-4-clear-acrylic-tube-16-long.html Yup, I have the exact same. My dosing containers are in a spot where they get constantly jostled or slid around, not a lot of room under my stand. I imagine yours are probably more stationary out of the way? I also forgot to mention, within the past 2 months, I purchased new tubes and dosing heads, and lubed everything up, I'm confident it's the acrylic meeting the bulkhead issue. Link to comment Share on other sites More sharing options...
WheresTheReef January 2, 2019 Share January 2, 2019 Yup, I have the exact same. My dosing containers are in a spot where they get constantly jostled or slid around, not a lot of room under my stand. I imagine yours are probably more stationary out of the way? I also forgot to mention, within the past 2 months, I purchased new tubes and dosing heads, and lubed everything up, I'm confident it's the acrylic meeting the bulkhead issue. Yea pretty much fill them up and leave them in place. I pushed the rods in tight and they aren't coming out. If you were able to remove them then they probably weren't inserted all the way. Maybe I'll silicone mine in to be safe, but I've been running them like that for over a year now with no issues yet. Link to comment Share on other sites More sharing options...
YHSublime January 2, 2019 Author Share January 2, 2019 2 hours ago, Origami said: Sounds like an air-leak through your peristaltic pump, which can happen with pumps that don't have many rollers and can stop in an unsealed state or if your connections are not air-tight. Could you address the problem with a small checkvalve? 2 hours ago, WheresTheReef said: 2 hours ago, YHSublime said: Yup, I have the exact same. My dosing containers are in a spot where they get constantly jostled or slid around, not a lot of room under my stand. I imagine yours are probably more stationary out of the way? I also forgot to mention, within the past 2 months, I purchased new tubes and dosing heads, and lubed everything up, I'm confident it's the acrylic meeting the bulkhead issue. Yea pretty much fill them up and leave them in place. I pushed the rods in tight and they aren't coming out. If you were able to remove them then they probably weren't inserted all the way. Maybe I'll silicone mine in to be safe, but I've been running them like that for over a year now with no issues yet. I want to update with this was seemingly complete user error on my part. BRS was too polite to tell me I'm just dumb. I looked over everything again tonight, and really pushed the rods into the bulkhead, I definitely did not have them connected properly. It took a lot more force than I thought to make sure they really connect. I re-primed and dosed what I collected from the test (20ml each solution, one in the sump, one in the display.) I'll obviously keep an eye out, but I'm fairly certain this was 100% me. Link to comment Share on other sites More sharing options...
Origami January 3, 2019 Share January 3, 2019 Good to hear that you may have solved this. Link to comment Share on other sites More sharing options...
YHSublime January 3, 2019 Author Share January 3, 2019 4 years ago today!Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
YHSublime January 8, 2019 Author Share January 8, 2019 Well, my alk fluctuations from the dosing incident seemed to have not done any favors for the Orange Passion, which slowly has STN'd over the past 5 days or so. Part of the top is still there, so I'm hoping that it'll bounce back, but not hopefully. One piece out of all the many is not too shabby though. Everything else is exploding, just taking my alk into consideration daily, until I can finally get it balanced out again. I was able to move out a mini colony (large large frag) of forest fire digi, and accidentally broke off the chunk of setosa. I used the new construction opportunity to chisel off the Jedi Mind Trick colony that was approaching all my acros, already starting with the PC Rainbow. This involved removing the whole rock, a flat head screw driver, and a hammer. While the rock was out, I also took a razor blade, and scraped back all the GSP that had started a network structure under the rock and was starting to spread on the other side! I didn't bother cleaning the glass, and it's been a hot minute since a water change, even though I've got the water made up Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now