Jump to content

Recommended Posts

  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

WATER IS FLOWING!!!

 

We got the last of the plumbing done for the main DT, drilled the sump, installed the pump, and filled it with water. Turned on the Hammerhead and everything looks great. Made some adjustments to the gate valves and was able to quite it down some for the amount of water that is moving through the system. Making more water to add the grow out frag tank into the mix.

 

Just need to tie the skimmer, UV, bio pellet reactor, chiller, and calcium reactor into the manifold. Does not need to be done right away, since we have it all laid out.

 

Will start rock work this week, my acrylic rods should have been here Fri. I am sure they are delayed because of the weather

AWESOME! I bet that feels good! No leaks?!

AWESOME! I bet that feels good! No leaks?!

Yea, a great feeling. We had two unions that were dripping, just had to tighten one, and double checked the O ring in the other and tighten a little more.

 

Not too bad for 186 joints & connections!

Yea, a great feeling. We had two unions that were dripping, just had to tighten one, and double checked the O ring in the other and tighten a little more.

 

Not too bad for 186 joints & connections!

 

I'd say that's close to a miracle!

 

I'm getting ready to cook some rock, I suppose I'll probably chat with you offline about your process. Now the fun part: Aquascaping!

WATER IS FLOWING!!!

 

We got the last of the plumbing done for the main DT, drilled the sump, installed the pump, and filled it with water. Turned on the Hammerhead and everything looks great. Made some adjustments to the gate valves and was able to quite it down some for the amount of water that is moving through the system. Making more water to add the grow out frag tank into the mix.

 

Just need to tie the skimmer, UV, bio pellet reactor, chiller, and calcium reactor into the manifold. Does not need to be done right away, since we have it all laid out.

 

Will start rock work this week, my acrylic rods should have been here Fri. I am sure they are delayed because of the weather

:clap:  :clap:  :clap:

I'd say that's close to a miracle!

 

I'm getting ready to cook some rock, I suppose I'll probably chat with you offline about your process. Now the fun part: Aquascaping!

Part of what took so long was the layout, dry fitting every joint, and dry fitting each section multiple times since many of them had multiply angles where one wrong 90 would effect the next ones.

(edited)

congrats sir - that is huge and probably one of the most innocent and fun moments seeing water move successfully for the first time through a new system. great update.

Edited by monkiboy

:clap:  :clap:  :clap:

 

Thanks!

congrats sir - that is huge and probably one of the most innocent and fun moments seeing water move successfully for the first time through a new system. great update.

 

Yes, one of those moments where you are relieved that nothing blows and water shoots out, but another step toward the main goal of enjoying my own small version of the ocean.

Congrats! !!!!!!!

 

aquarium7043.png

 

Ready for some lights? If you are still interested....I know it has been a while.

 

pumping water yea, have you added salt?

 

No salt just fresh, it will show any leaks quicker then saltwater which will clog them.

Wow, congrats! that feeling when the water flows through all the pipes without a leak for the first time is amazing.

Wow, congrats! that feeling when the water flows through all the pipes without a leak for the first time is amazing.

Yup, great feeling. I just got the grow out frag tank filled and it is running on the same system as the DT.

(edited)

Congrats!!!

Thank you, can't wait to start cleaning up the basement of all the items that were not needed in the build. Should be able to start rock work, and time to order sand this week.

Edited by DuffyGeos

WATER IS FLOWING!!!

We got the last of the plumbing done for the main DT, drilled the sump, installed the pump, and filled it with water. Turned on the Hammerhead and everything looks great. Made some adjustments to the gate valves and was able to quite it down some for the amount of water that is moving through the system. Making more water to add the grow out frag tank into the mix.

Just need to tie the skimmer, UV, bio pellet reactor, chiller, and calcium reactor into the manifold. Does not need to be done right away, since we have it all laid out.

Will start rock work this week, my acrylic rods should have been here Fri. I am sure they are delayed because of the weather

Water is flowing from too much beer. :)

Awesome!!

 

 

Thanks, 24 hours in and looks like only one connection is a little damp, no real dripping, just can see my fingers are damp when I run them over that one fitting. Going to wait to see if it stops on its own once salt is added.

 

 

 

Water is flowing from too much beer. :)

No, actually Port last night. Our neighbors had a Portuguese dinner party last night so it was a late night. Still not feeling really good.

Thank you, can't wait to start cleaning up the basement of all the items that were not needed in the build. Should be able to start rock work, and time to order sand this week.

Your wife is going to be so happy! You may even make your deadline lol

 

aquarium7043.png

Your wife is going to be so happy! You may even make your deadline lol

 

aquarium7043.png

 

Yea, she is not thrilled that I am pushing this to the limit. March 16th will be one year. Closing down my one 55g tank this week and moving fish over to the frag QT tank - which will be a temporary fish tank.

March 16th will be one year. That why I went from tagging along to dragging along .  :laugh: Could not pass that up "D"

March 16th will be one year. That why I went from tagging along to dragging along .  :laugh: Could not pass that up "D"

 

Thanks for the rhyming Dis. :tongue: I need to do some cleaning up, then I will take some more pics and get them posted. I did not want to ask my wife to post any to my gallery since she will not be thriller till she sees my other tank shut down and out of the storage room, so I can put the shelves back in and clean out the rec. room.

Yea, she is not thrilled that I am pushing this to the limit. March 16th will be one year. Closing down my one 55g tank this week and moving fish over to the frag QT tank - which will be a temporary fish tank.

 

LOL.  At least you're getting it done. 

LOL.  At least you're getting it done. 

 

Oh it will get done, and the way I want it done. Life and work just get in the way. Since it is downstairs it is not like it takes up a huge living area. The biggest complaint is from my kids that they can't play Xbox down stairs........oh well.

Oh it will get done, and the way I want it done. Life and work just get in the way. Since it is downstairs it is not like it takes up a huge living area. The biggest complaint is from my kids that they can't play Xbox down stairs........oh well.

 

THey can't play Xbox? Child deprivation!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...