Fishie

Matt thanks... I did get it in.. took 4 strong dudes to help... I got them to help before Trump put up his wall Sent from my iPhone using Tapatalk

Hey guys moving my ro/di from thicker copper pipes to these pictured here What do you recommend I use for fitting it here ? Sent from my iPhone using Tapatalk

Hey Folks I need help to unload a Tank tomorrow it will be heavy 150Gallon Elos 160... beers on me ...ill order pizza too Good news is this will be on my main level...which is 1 step at Foyer...should be quick ... please txt me at 571-294-4635 thanks Nik

heard that people have had reliability issues with them...i have a neptune controller...but have never liked neptune service i have couple MP40's WES, that i maybe putting up for grabs..ecotech has the best support ever on anything i just got the gyre xf250, holy &%$# it moves stuff and very quiet...never experienced support with maxspect...so no comment yet

hey all , i switched from LEDs to T5 and within a day my pH keeps dropping lower than I'm used to seeing at the low point. could it be because of the light change ?, does it impact the sps needs ?

Drain line ... I typod return accidentally

when i do my future build Rob I'll have it done right by you i fixed it this time and just put a union since it wasn't the ball valve that was clogged turns out my flame wrasse :( somehow got back there despite having a net top...that and some old snail shells did it anyway all clear now...thx

hey guys, my return line seems clogged somewhere... it is all hard pvc glued...and has a ball valve in the middle....after some testing i believe the ball valve input is the cause. thing is i cannot turn the valve, I've tried a wrench and its stuck good and finally one of the holding thumb twisting extensions even broke off... i am planning to cut of the plumbing and redo it again without a ball valve in the return line.. any suggestions ? i plan on putting a temporary flexipipe to my 1 inch drain line.

this is very sad ...sorry for your loss

Oops I always thought u were in reston ... Well Oakton is just as good

That's the most well planned thought out tank I've seen in a while ... Fits well in restons planned community The lighting maroons looks so cool

I could do an in tank skimmer as well if it doesn't take up a lot of spAce ... He tank will only be used for holding fish

I picked up a rubbermaid tub and I am looking for something like a fluval that I can hang on it I got the fluval 40-70 but it's about half and inch to thin to hang Any suggestions on what else I can try Also looking for suggestions for a hob skimmer for it Its 53 long x 31 wide x 12 height and 50 gallons

i also have a eheim jager heater and an aqueon pro... are those 2 better safer...i always keep 2 in tank so i don't mind switching to those if they are "safer"

wow thats scary...i thought they were good cuz of the reviews on BRS i cleaned mine up and its good again... i also don't think it could overheat in this case cause the apex would detect the temperature increase and cut power to the heater. so even if the finnex controller malfunctions and decided to be always on ...the apex would not allow it. for now everything is working good again seems like there is a horror story for almost every heater model

hey guys i had a few alarms go off on my tank and i am trying to figure what triggered what. I believe that they are 2 separate incidents...but here goes. i got a notification of low sump levels ( which i usually ignore cause my ato catches up unless i get them frequently enough indicating a real problem). so i did get it a few of them today and went to look into it. i found that it was a real issue cause my sump was low in the area being monitored & my skimmate locker was nearly full. Now i proceeded to look at my return pump and found a fatty turbo snail (empty shell) partly blocking it. I figured that the shell which was partly restricting water flow caused the water level to rise in the sump thereby increasing the skimmate level and causing it to overflow. i fixed everything and thought it was all good. then i hear a constant low volume alarm like sound. I look into it and it turns out that one of my heaters , the BRS Finnex titanium heater is showing 92 degrees and flashing. the tank temperature was actually 79 so i realized the finnex was malfunctioning. I cleaned the temp probe a little and it looked like it fixed the finnex but i took it out and i am giving it a vinegar bath now. so my question is does this look like 2 unrelated incidents or could the finnex have resulted in the skimmer overflowing in some way? also i did not know that the finnex have a but in alarm sound..which is good i guess..but i want to confirm that it is indeed an alarm sound due to the temp being too high and not something else that tells me to not put it back in. the apex graphs show my power to the titanium heater going off today at 7am based on the power drawn so its not something that i just happened to catch while fixing the skimmer/tuurbo snail shell blocking.

I haven't been particularly good at managing the frozen slab of food...cuz it would gather at one end and get thick and I would be too lazy to break it to the right size. anyways I wanted to try making my own version of frozen fish food. I got mini ice cube trays to keep them at the right size and I can resuse them as needed I was thinking of the following 1) Vitachem 2) freeze dried cyclop-eeze 3) rods food 4) fresh shrimp 5) some random fishy stuff from a Asian grocery store (idk if I can find some roe etc there for sushi...I may throw that in with it) 6) seaweed rolls 7) mashed clove of garlic mash it all up and pour in the mini cube tray I want to add some probiotics but don't know what to put in there ...any suggestions ?

sorry to hear...he/she had it good for 6 years under your care

I have noticed that when i take my swabbie lid out to clean that there is a thick (almost an inch) layer of gunk that is collected near the upper 25% of the wiper blade. this happens over a period of time. I've also seen on occasion that it got kinda big enuf to have fallen back into the skimmer body and sit on a part of the bubble making section near the bottom of the skimmer. It didn't disintegrate on its own and i had to manually break the clump. the 2nd wouldn't happen if i wasn't gathering so much gunk on the blade to begin with. any suggestions on what i could be doing to make this better. 1) increase skimmate level more ? 2) how often should the wiper be cleaned. also just a suggestion ...atm i have to take the lid long with the wire when i clean... maybe a dc plug on the motor would help to disconnect the wire from the motor housing to allow only the lid to be taken without removing the cable.

looking good always liked the DD

wow truly spectacular

I would avoid all males...don't think it would work...plus a male flame wrasse is very $ vs a female flame wrasse ...also the transformation is fun lyretail anthias u cud go with a male tho and multiple females...btw the colors of certain bartlets are much cooler than lyretail... I have lyretail now and wud have preferred to have gone bartletts

Males turn heads ... Contrary to mankind [emoji39]

go all females and let them sort out who will be dominant male...ive heard aggression is better with a grp more 4+ so the male can bounce around his bi****es lol

I shud add I had a melanarus also in there for a short while no issues ... Just was too big so sold it