Jump to content

Recommended Posts

http://reefbuilders.com/2015/02/17/bulk-reef-supply-demonstrates-toxic-chloramine-water-filters/

 

***synopsis******

Traditional carbon filters demonstrate very early failure in terms of getting rid of chloramines, often failing at 150 gallons of use.  Their filter (BRS universal) reportedly doesn't)

 

Caveat: I know this isn't a double blind study and they have obvious financial ties to the product.  Also, without knowing if they put a sediment filter prior to the unit as well as the type of membrane they used, it's hard to know if other stages are taking out chloramines.  

 

I'm ordering a chloramine test kit to check but has anyone validated this on their own systems?

 

 

They use DOW 75gpd membranes in their RODI setups. The sediment filter is a GE RO Saver on their nicer models.

 

I've personally switched to this same filter setup, just with one BRS universal carbon stage instead of two.

 

 

--

Warren

They use DOW 75gpd membranes in their RODI setups. The sediment filter is a GE RO Saver on their nicer models.

 

I've personally switched to this same filter setup, just with one BRS universal carbon stage instead of two.

 

 

--

Warren

 

Warren,

 

Did you do any before and after testing after installing the new universal?  I'm always leery of claims made by companies with a vested interest but this seems like an easy thing to verify.  

 

Are you using the universal after sediment but before another carbon block?  I've got a 5 stage (sediment, 2 carbon, 2 di) on a 150 gpd unit (2 75 membranes) so thinking about replacing the first carbon block and then using the strips to monitor when to change the carbon blocks.

Do we know whether chloramines are used in area water supplies? Anyone know for wssc?

I called a year or so ago and they confirmed they use chloramines.

Warren,

 

Did you do any before and after testing after installing the new universal? I'm always leery of claims made by companies with a vested interest but this seems like an easy thing to verify.

 

Are you using the universal after sediment but before another carbon block? I've got a 5 stage (sediment, 2 carbon, 2 di) on a 150 gpd unit (2 75 membranes) so thinking about replacing the first carbon block and then using the strips to monitor when to change the carbon blocks.

I bought the best carbon block available from BRS weeks before they announced the new universal. Using the LaMotte test strips, I can see that I already have break through after not a whole lot of water. I bought the BRS universal after seeing this but I haven't swapped it yet since it is so cold outside. I usually do RODI filter swaps outside due to all the water.

 

My RODI is setup in order:

Small sediment filter

Shurflo gold pump

GE RO saver sediment filter

Soon: BRS universal

Dual DOW 75 gpd, for a total of 150

Refillable color changing BRS DI

 

 

--

Warren

Their universal carbon blocks are out of stock anyway, so maybe it's all a moot point.

  • 1 year later...
(edited)

Stafford County report from 2015. TDS is usually 0 but I have seen it go up to 3 on occasion. 

 

30979470351_bf3ca317d5_b.jpg

Edited by madweazl

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...