ImGoingCoastal

Could you use acrylic? Might be a bit easier to work with. Sent from my SM-G970U1 using Tapatalk

My apologies. Well maybe someone will find that useful. [emoji51] Good luck! Sent from my SM-G970U1 using Tapatalk

GO SLOW! Keep the water running. Create a template out of wood, secure it with more tape then you think is necessary. Introduce the bit at an angle then slowly lower the rest of the bit down, though this might not be necessary if your template is good enough. Don't push hard. GO SLOW! In all seriousness. I've drilled like 5 tanks and have only broken one (thought it wasnt tempered, turns out it was). If I can put a hole in a tank, you can too. The 10 gallon glass might even be easier since it's less time cutting. Sent from my SM-G970U1 using Tapatalk

Nope, it didn't, I checked it around 10am. Crazy ironic since I haven't checked the page in 3-4 weeks. Sent from my SM-G970U1 using Tapatalk

Dang it! I literally just checked the page this morning. Already had my flight booked too.... Sent from my SM-G970U1 using Tapatalk

Thanks! I'm just using the simple version of the Creality slicer so far. Getting the rafts off has been a PITA! Hopefully I can catch them right when the finish.... Sent from my SM-G970U1 using Tapatalk

Thanks. I ended up snapping all the test tube drying posts off while trying to pull the base layer off [emoji21] Huge learning process. One of these days I'll have it down. Sent from my SM-G970U1 using Tapatalk

Pretty cool Paul! I FINALLY got my ender 3 today yesterday (a month and 2 days after ordering). I'm enjoying it immensely! I learned about those supports the hard way 1st picture. Second picture is what is currently printing after I realized I could just rotate it and print it without needing supports! Sent from my SM-G970U1 using Tapatalk

You can but you need an additional adapter for it. You'll need a classic or a lite with vdm module though, plus the adapter. Sent from my SM-G970U1 using Tapatalk

Sure does. Sent from my SM-G970U1 using Tapatalk

You can use it to adjust 0-10v items like dimmable LEDs. Sent from my SM-G970U1 using Tapatalk

You can find classics for under $200 (just have to keep your eyes peeled and act quickly. You can further your cost savings by going with an apex lite. It's essentially a classic but does not have the vdm port and only has one pH/orp port. Sent from my SM-G970U1 using Tapatalk

I acquired a second hand classic and love it. It does nearly everything an El will do. The classic isn't wireless but I just bought a $15 wifi extender and plugged it into that. Plus this wifi extender also has a controllable outlet on it which I connected my webcam to so I can power cycle it. Worth the investment if you really desire automation. Sent from my SM-G970U1 using Tapatalk

What about maybe a slide effect from the unhealthy coral to the recovered? That way at one point and time you'd see half of both of them on the screen at the same time. It would definitely help keep the impact up there. So my though is you'd have the 2 slides of the same coral with a transition effect between them, then suddenly a new unhealthy coral appears on the screen and slides to a healthy one, rinse and repeat. That way there's no confusion as to what you're looking at. New image means new coral, sliding image means youre looking at the same coral. Hopefully I'm explaining what I'm thinking properly and it make sense. Sent from my SM-G970U1 using Tapatalk

I also picked up this unique corals sniper milli a month or so ago. Sent from my SM-G970U1 using Tapatalk

That's awesome. Looks like you're looking into the ocean almost! Sent from my SM-G970U1 using Tapatalk

Following along. I love my (what I think is a) rainbow milli, it's my favorite coral. Sent from my SM-G970U1 using Tapatalk

Good to hear! Their customer service responses are a bit underwhelming. Hoping that is not the case with the printer. Sent from my SM-G970U1 using Tapatalk

I ordered myself an ender 3. Can't wait to use it, if it ever ships. Sent from my SM-G970U1 using Tapatalk

Order a boat load of peppermint shrimp and let em loose in your tank. Then sell most or all of them on here when they've fixed your problem... Sent from my SM-G970U1 using Tapatalk

That would look awesome! Sent from my SM-G970U1 using Tapatalk

I think you need a mixture of rock. Maybe get a box or two of some small to medium stuff you could mix in? Sent from my SM-G970U1 using Tapatalk

https://www.petesaquariums.com/shop/saltwater-aquarium-fish/cardinalfish/longspine-cardinalfish-or-threadfin-cardinalfish/ This place supposedly has some in stock. Never used them though. Sent from my SM-G970U1 using Tapatalk

I'm assuming it's innovative marine? Possibly contact them? Sent from my SM-G970U1 using Tapatalk

Nice! How big are the pieces of rock? Almost ordered some but saw it said that 40 lbs was two massive pieces. Sent from my SM-G970U1 using Tapatalk