anenome812 July 23, 2013 July 23, 2013 I removed a large piece of live rock several month ago so I could change my aquascape, now I want to put it back in and change things before I start adding a lot of coral. I only have a few pieces of coral and the frags I got at FF, is it ok to just put it back in my tank or do I have to cook it. Also it has been in a tub and is dry
Djplus1 July 23, 2013 July 23, 2013 If its completely dry you should have no problem with adding it. The dead stuff on live rock is what makes the cycle, etc happen. As long as your rock is devoid of rotting stuff you will be fine.
anenome812 July 23, 2013 Author July 23, 2013 Thanks, I was hoping that would be the case. I just hated to throw it in and then find my ammonia levels going up.
TheyCallMeMr.703 July 23, 2013 July 23, 2013 Thanks, I was hoping that would be the case. I just hated to throw it in and then find my ammonia levels going up. that may happen, Keep an eye on it....
monkiboy July 23, 2013 July 23, 2013 if it was once live and you didn't cook it, have it out in the sun, or do anything to it, it likely that all the matter has decomposed on it and tossing it back in without even a rinse will release it into your tank. give it a once over, remove any matter from it then give it a go and monitor your levels especially on a small tank.
gmerek2 July 23, 2013 July 23, 2013 Soak in a bucket for a day to losen up dirt or crusted up old dead algae. Then scrub and place in tank
Origami July 23, 2013 July 23, 2013 Anything organic that has not yet decomposed completely and been removed, whether it is dried out or not, is a source of nutrients. Inspecting and scrubbing the rock is a good precaution. I've even power-washed rock using a high-pressure power washer (the 3000 psi kind) before to make sure that I got as much junk as I could reasonably get (even the stuff that was blended in that I couldn't see).
hawkfish01 July 23, 2013 July 23, 2013 My regime with rock is this:if sundried i guve a good scrub to knock off any loose dead debris If boiled and scrubbed qwik rinse in rodi and put in tank BUT i would still monitor for any ammonia spikes just in case i missed anything..you just never know...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now