Tracy G September 6, 2014 Share September 6, 2014 Looks familiar! Do it, for sure. We filled a five gallon bucket completely with chaeto from the size of a baseball in two weeks, that's even with giving some away to a few different people. Have any pictures? will send a few tonight Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Tracy G September 7, 2014 Share September 7, 2014 looks like a Jack'oLantern lol Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
YHSublime September 7, 2014 Share September 7, 2014 Tis' almost the season. Link to comment Share on other sites More sharing options...
Decadence September 7, 2014 Author Share September 7, 2014 That is awesome TracyG. Are there any improvements that you would make if you were to do it over again? Link to comment Share on other sites More sharing options...
Rob A September 7, 2014 Share September 7, 2014 Wow! Great DIY project! Link to comment Share on other sites More sharing options...
Tracy G September 7, 2014 Share September 7, 2014 That is awesome TracyG. Are there any improvements that you would make if you were to do it over again?Nope works great. Only thing I did different is the entire overflow on this 20g long goes through it so it has 2 intakes. With that flow I did not use a powerhead in their. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
AlanM September 7, 2014 Share September 7, 2014 I don't have a great spot for mine picked out, plus I want it to be removable for cleaning, so I'm putting a few unions on mine. Should let me rotate the pipes around for alignment and also take it apart easily.. Also using a 3/4" hose input hose going in because I have a precious 3 feet of 1" spaflex that I don't want to use for this. Link to comment Share on other sites More sharing options...
AlanM September 7, 2014 Share September 7, 2014 And here it is. I don't have a shop light so I may put my d120 fuge light over it instead. I also don't have any chaeto so I need to go to Laurel to steal some. Link to comment Share on other sites More sharing options...
YHSublime September 8, 2014 Share September 8, 2014 Looks clean, Alan. So are folks just using a manifold off their pumps to service this? Separate pumps? What is the heat like running that 24/7? Link to comment Share on other sites More sharing options...
AlanM September 8, 2014 Share September 8, 2014 I have a return pump that is valved way down because it supplies way too much water, even going up a floor and over about 12 feet. I put the valve past a manifold which is off a Tee on the main return line, so I have plenty of water pressure to run through my skimmer, through my GFO, through some carbon when I am in the mood, and out the end of the manifold to this chaeto factory. Link to comment Share on other sites More sharing options...
Decadence September 8, 2014 Author Share September 8, 2014 Awesome AlanM. Mine is run by my overflow. It is adding heat to the water of course but nothing appreciable in my case. My heaters don't come on nearly as much during the day to regulate the temperature to 77. Link to comment Share on other sites More sharing options...
ctenophore September 8, 2014 Share September 8, 2014 Hmm, running by gravity feed is a great idea. You essentially have a living filter sock that you can tear up and throw away, and never have to wash. I think I'll build one too. Link to comment Share on other sites More sharing options...
elbowdeep88 September 20, 2014 Share September 20, 2014 I like this concept a lot. How is it working for everyone? Link to comment Share on other sites More sharing options...
Decadence September 22, 2014 Author Share September 22, 2014 Hmm, running by gravity feed is a great idea. You essentially have a living filter sock that you can tear up and throw away, and never have to wash. I think I'll build one too. Awesome I like this concept a lot. How is it working for everyone? Mine grows chaeto like a madhouse. The only problem that I have with it is that the air bubbles from the overflow get trapped in the dense chaeto and make it float. If you let it go long enough, chaeto will come out of the water and cook under the powerful light. More turbulence in the bucket would help get these bubbles out so I plan to add a powerful pump to get more agitation. Link to comment Share on other sites More sharing options...
L8 2 RISE September 22, 2014 Share September 22, 2014 Cool plans. What light cycle are you all running on? reverse from tank? 12hr? Link to comment Share on other sites More sharing options...
AlanM September 23, 2014 Share September 23, 2014 Mine is spinning slowly. Looks good. Thanks for the idea! Link to comment Share on other sites More sharing options...
Decadence September 23, 2014 Author Share September 23, 2014 Cool plans. What light cycle are you all running on? reverse from tank? 12hr? I run mine 24 hours. The Lowes bucket leaves very little light-bleed. Mine is spinning slowly. Looks good. Thanks for the idea! Looks great! After my chaeto ball got huge, I wound up sticking a powerhead in there with a screen on it to prevent it from clogging with chaeto. Now that the bucket is completely filled, I think I need an even bigger powerhead. Link to comment Share on other sites More sharing options...
AlanM September 24, 2014 Share September 24, 2014 Day 2. A bunch of growth already. Maybe it is just less dense, but you can see how foamy it is from the bubble production and how much bigger it is after a day. Chaeto day 2: Link to comment Share on other sites More sharing options...
Decadence September 24, 2014 Author Share September 24, 2014 Awesome Alan. That's pretty consistent with what I saw in the first few days as well. Link to comment Share on other sites More sharing options...
davelin315 September 25, 2014 Share September 25, 2014 Be careful of salt creep and starting fires... With the light essentially being in an enclosed environment like that you run the risk of moisture building up in the fixture and the wiring and then arcing. The ballast for the light could also get compromised in such an environment. Link to comment Share on other sites More sharing options...
Decadence September 26, 2014 Author Share September 26, 2014 Be careful of salt creep and starting fires... With the light essentially being in an enclosed environment like that you run the risk of moisture building up in the fixture and the wiring and then arcing. The ballast for the light could also get compromised in such an environment. I'm running my light 24/7 and have found that it is impossible for moisture to build up in it because of the heat. I get salt at the very bottom of the reflector and on the tip of the bulb and clean it weekly but haven't noticed anything which could cause any damage. Link to comment Share on other sites More sharing options...
AlanM September 26, 2014 Share September 26, 2014 So I set mine up Monday afternoon. Friday morning the chaeto is basically filling the bucket horizontally. I'm going to be able to supply chaeto to Montgomery county. LOL It has more room to grow vertically, but it isn't spinning anymore. I'm not sure if it really needs to spin because the water spins even if the chaeto doesn't. I have a smaller clip-on reflector on mine which makes it easy to go in there each morning and poke it, turn it manually so the same side doesn't face up. spin it a little to shake off detritus, etc. Also, I'm using a lower wattage CFL than Decadence put on his, so I may upgrade to a bigger one. I don't have my grow light on it at the moment, but I kind of don't see the point of putting that on there since this is working so well. Link to comment Share on other sites More sharing options...
SunWyrm September 26, 2014 Share September 26, 2014 Saving this thread so I can use this in my new build. This is awesome! Link to comment Share on other sites More sharing options...
20LogR October 22, 2014 Share October 22, 2014 Has any thought about using an airlift for more flow in the bucket over powerheads that will add more heat and require maintance to clean? Link to comment Share on other sites More sharing options...
AlanM October 22, 2014 Share October 22, 2014 Mine doesn't spin, but grows well. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now