davelin315 December 4, 2013 December 4, 2013 300 gallon display, before I lost everything very heavy bio load (multiple large fish including some 8-10" tangs and angels). It's recirc with a direct feed, uses 3 pumps - 1 eheim and 2 sicce, believe 1262 eheim and sicce 2500s.
GraffitiSpotCorals December 4, 2013 December 4, 2013 He has a "fish room" behind his tank... Jealous...
Swimboy123 December 4, 2013 Author December 4, 2013 To be fair, the "fish room" is also the "laundry room" as well as the "storage room". It's more like the fish "corner".
GraffitiSpotCorals December 5, 2013 December 5, 2013 True that, well which type are you leaning towards? Needle wheel or other? We gotta get that out of the way.
Swimboy123 December 5, 2013 Author December 5, 2013 I am really leaning to a beckett injector system as I have had good luck with them in the past
gws3 December 5, 2013 December 5, 2013 It's just called a ATB Cone Large. Very similar to the 1260, just an earlier version. An 8" body will handle 150-200g all day. Which ATB did you get?
Sharkey18 December 5, 2013 December 5, 2013 I inquired about the AVAST CS-5 which is what I really want but it is $2500 bucks!
ridetheducati December 5, 2013 December 5, 2013 (edited) I inquired about the AVAST CS-5 which is what I really want but it is $2500 bucks! Just skip your mortgage payment this month. JK. Edited December 5, 2013 by ridetheducati
YHSublime December 5, 2013 December 5, 2013 I inquired about the AVAST CS-5 which is what I really want but it is $2500 bucks! Should have gotten it on the Booty Buy! (Also JK)
GraffitiSpotCorals December 5, 2013 December 5, 2013 Eh you can find a nice beckett with patience in short time. I think becketts and ozone are a good combo.
ctenophore December 5, 2013 December 5, 2013 You may just want to consider total cost though factoring in the power of an iwaki/blueline @ 250-300 watts vs. a Sicce or two at 30w. (difference of 240w = 5.76 kwh/day = $252/yr @ .12c/kwh, check my math though)
ridetheducati December 5, 2013 December 5, 2013 A three or four foot dual beckett is hard to beat. A friend has a MRC MR3 sitting in his closet, he is thinking about getting back into the hobby. The power consumption and beckett maintenance caused me to sell my unit several years ago. Having to clean the beckett weekly was difficult to deal with. Those tiny snails you see spawning in your tank constantly clogged the beckett. Category Heavy Weight Championship Level Skimmer Beckett Lighting 400w Metal Halide Power Head Tunze and Vortech Note: I have experience with the following skimmers, GEO Beckett (48"), MRC MR3 Dual, H&S A200, ASM G4+, and Bubble Master 200.
epleeds December 5, 2013 December 5, 2013 No disrespect, but your skimmer is performing "excellent" because its undersized and trying to keep up. I would expect the XP5000 on a 400g system. What you have seems to fit your reef keeping methods. My skimmer, Bubble Master 200 is designed for a 150g-200g, which I ran on my 180g, is currently pulling duty on my 290g volume system. I can see the smoke billowing out the skimmer pump its working so hard to keep up. Skimmate is dark,nasty and rancid. One other indicator I know the skimmer is lagging is because I am accustomed to the water in the tank to be invisible. When you look inside the tank you do not see water, just fish, corals, and rock. That is one sure fire way of knowing whether the skimmer is properly sized. My system has a light bio load, as I move into the moderate level, I plan to upgrade. I prefer external skimmers placed inside a sump, better control. Quick question...does having dark, nasty and rancid skimmate mean that the skimmer is working too hard? I am running an ATB 1050a on my system. About 275-300 gallons with 25 fish. The skimmate smells worse then when i had to change my kids diapers. Even using Kalk powder, it still stinks... I clean out the skimmer cup every week or so and my wife is always like. "what the ^%$&*^ is that..."
ridetheducati December 5, 2013 December 5, 2013 Quick question...does having dark, nasty and rancid skimmate mean that the skimmer is working too hard? I am running an ATB 1050a on my system. About 275-300 gallons with 25 fish. The skimmate smells worse then when i had to change my kids diapers. Even using Kalk powder, it still stinks... I clean out the skimmer cup every week or so and my wife is always like. "what the ^%$&*^ is that..." No necessarily, what happens in the skimmer cup is only part of the story. What kind of skimmate would you get if you replaced the ATB with a HOB skimmer? Skimmate would be dark, nasty, and rancid. However, the system would not be cleaned adequately. The bioload you described sounds moderate to high and the ATB is up for the challenge.
sachabballi reef December 5, 2013 December 5, 2013 i love my mrc mr2r skimmer...the thing is a beast and pulls out such dark black thick skimmate its amazing...
GraffitiSpotCorals December 6, 2013 December 6, 2013 A three or four foot dual beckett is hard to beat. A friend has a MRC MR3 sitting in his closet, he is thinking about getting back into the hobby. The power consumption and beckett maintenance caused me to sell my unit several years ago. Having to clean the beckett weekly was difficult to deal with. Those tiny snails you see spawning in your tank constantly clogged the beckett. Category Heavy Weight Championship Level Skimmer Beckett Lighting 400w Metal Halide Power Head Tunze and Vortech Note: I have experience with the following skimmers, GEO Beckett (48"), MRC MR3 Dual, H&S A200, ASM G4+, and Bubble Master 200. Yea the snails is why I like my lifereef homemade thing with the mazzi injector. It never needs attending too, and I never need to clean anything but the cup. I think there has to be some good ways of keeping the snails out of your beckett injectors though.
GraffitiSpotCorals December 6, 2013 December 6, 2013 You may just want to consider total cost though factoring in the power of an iwaki/blueline @ 250-300 watts vs. a Sicce or two at 30w. (difference of 240w = 5.76 kwh/day = $252/yr @ .12c/kwh, check my math though) Note he has a large skimmer with only two pumps similar the the sicce your talking about. Even with the third running on his skimmer I think a good beckett or equivant skimmer would out do any other needle wheel option especially with ozone on the beckett. The wattage I would spend just for performance. Not sure how Braden feels about hat but he hasn't switched back to LEDs since gettin his t5 halide combo.
08can-am December 7, 2013 December 7, 2013 I have a sro6000 on my 300 DD heavy stock/feeding and it works great courtesy of my sweet S4
ridetheducati December 7, 2013 December 7, 2013 I have a sro6000 on my 300 DD heavy stock/feeding and it works great courtesy of my sweet S4 Nice combo, send me some pix, I would like to see.
08can-am December 7, 2013 December 7, 2013 Nice combo, send me some pix, I would like to see. courtesy of my sweet S4
GraffitiSpotCorals December 8, 2013 December 8, 2013 Great looking! I don't like the internal skimmers as much because only half the skimmer body is getting filled wih bubbles, other versions you get a little more area. The sro 5000 internal I liked a lot, had great area for contact time and the bubbles were extreemly uniform going up to the top, completely different than most pumps and skimmers I have used. Not sure how the cone and uniform bubbles would make a difference though.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now