flooddc
-
Posts
3,927 -
Joined
Content Type
Profiles
Forums
Gallery
Events
Store
Everything posted by flooddc
-
Got some chopped shrimp today and going to feed the anemones. Look around the tank and the scott's fairly wrasse was no where in sight! She usually swim around the top and just feed her a large chunk of frozen this morning. Looked around on the floor...nada!!...look on top of the netting...my heart dropped She managed to got out on the tiny slits that I made on the netting for feeding . Bummer!!! now she is going to help me cycling the 150G...
-
-
-
From the album: Anemone tank
-
Chuck's 125G extension build (300+Gallons)
flooddc replied to flooddc's topic in Dedicated Tank (Build) Forum
As for equipment: I will be running (2) WP-60 and (3) LED fixtures, one of which will be DIY. I decided to do a simple DIY LED to accommodate the center brace. DIY LED fixture will have 2 modules on each side. Plan and actual fixture: appears to be okay! will see how it turned out when I hook it up -
Chuck's 125G extension build (300+Gallons)
flooddc replied to flooddc's topic in Dedicated Tank (Build) Forum
Last night, I decided to get it wet! My plan is to cycle it and then tied it into the existing 125G and sump. I am starting the cycle using about 80lbs of LR from my sump and 80lbs of dried rocks. Will be using skimmate and some old water from water change help speed up the cycling process (I hope!) Here we go!!! -
Chuck's 125G extension build (300+Gallons)
flooddc replied to flooddc's topic in Dedicated Tank (Build) Forum
Made some improvement on the cabinet/stand and put the tank back in it's place. It freaking heavy when doing it by your self! -
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
Chuck's 125G extension build (300+Gallons)
flooddc replied to flooddc's topic in Dedicated Tank (Build) Forum
Finally got it drilled and installed bulkheads and overflow. Not the best looking drilled holes, but good enough! -
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
From the album: Chuck's 125+150
-
Nice writeup! but am a bit lost after the pins and then totally lost at the program codes . I am in the process of a small simple DIY LEDs. I'll need lots of help since my electronic knowledge has gone south!
-
Cool!
