bluce July 2, 2016 Share July 2, 2016 I'm trying to make water changes easier. I'm setting up a rubber maid for salt water mix / storage in the basement. When I want to do a water change I would like to unwind a hose from the container to the tank - probably will need about 18' head pressure. Does anyone have any good economical pump suggestions - other than a $180 mag 18 or $300 -$500 reeflow? It seems like most magnetic drives have max head of 12' or less. What other types of pumps would work. I will only be using it for short periods of time. Link to comment Share on other sites More sharing options...
epleeds July 2, 2016 Share July 2, 2016 (edited) <edited - can't offer to sell something in this forum. Let me send you a PM.> Edited July 2, 2016 by Origami Link to comment Share on other sites More sharing options...
sethsolomon July 2, 2016 Share July 2, 2016 a Jebao 15000 has a max head pressure of 16' and reliability is not a big issue in this case. you can get them for arround $120 on ebay. Link to comment Share on other sites More sharing options...
bluce July 2, 2016 Author Share July 2, 2016 Does anyone think this submersible utility pump would be better From "Everbilt" at home depot 1/6 hp. http://www.homedepot.com/p/Everbilt-1-6-HP-Submersible-Thermoplastic-Utility-Pump-SUP54-HD/205618696 It has a max head of 25' Or do you think the mag 24 would be better? Link to comment Share on other sites More sharing options...
sam75 September 12, 2016 Share September 12, 2016 The one from Home Depot may work, but I would be a little scared that it might not be marine safe (not sure it could be fine but I have not come across anyone using them). Personally would look for a cheap used mag 18. I picked up a very used mag 9.5 for the same purpose. Works well but do not under estimate head pressure Link to comment Share on other sites More sharing options...
sam75 September 12, 2016 Share September 12, 2016 Depending on how long you want to wait for you water change a 24 may be better. Just realize head pressure ratings are often best case, do the math, and assume yours is gonna perform a little worse on the plus side the was the greatest upgrade I ever made to my tank! Link to comment Share on other sites More sharing options...
Origami September 14, 2016 Share September 14, 2016 I would not use a submersible sump pump for this purpose. Saltwater can be very hard on a pump and I'd be worried about corrosion and release of oils and other stuff into the water. If you were just pumping water out into a drain or something, that's one thing. If you're moving your change water over, that's another thing altogether. My advice is to get something that's been proven effective by other hobbyists and has a decent track record. Link to comment Share on other sites More sharing options...
AlanM September 14, 2016 Share September 14, 2016 I'm trying to make water changes easier. I'm setting up a rubber maid for salt water mix / storage in the basement. When I want to do a water change I would like to unwind a hose from the container to the tank - probably will need about 18' head pressure. Does anyone have any good economical pump suggestions - other than a $180 mag 18 or $300 -$500 reeflow? It seems like most magnetic drives have max head of 12' or less. What other types of pumps would work. I will only be using it for short periods of time. I'd watch out for a used pressure rated pump for 100 or so. Could you possibly permanently plumb it in to the tank location with some cpvc or pex or something? Then you could flip a switch at the tank and have new saltwater coming out of a spigot. Would be awesome. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now