jamesbuf December 13, 2010 Share December 13, 2010 So I've seen more and more clones of the biopellets come out now. Does this mean the system actually works for reducing nitrates and phosphates, or are companies just hopping on the bandwagon on the latest product to make a buck? Has anyone used them in a reactor and had success with them?? Iunderstand the science behind it. Provide a carbon source so bacteria can thrive and reproduce, thereby consuming nitrates and phosphates, and then the bacteria gets removed by the skimmer. Let's here some real life experiences!!!!! Link to comment Share on other sites More sharing options...
zygote2k December 13, 2010 Share December 13, 2010 I use them in a reactor in my skimmerless system and they appear to be working now after 6 months of use. Starting N03 was 30ppm- now it is less than 10ppm. I use the pellets in every system that I maintain and they seem to work effectively at removing nitrate. They might be removing P04, but I'm not testing for it. Link to comment Share on other sites More sharing options...
F&Fmgr December 13, 2010 Share December 13, 2010 Ive emploeyed them in a reactor in two of my systems. first thing i noticed was the reduction of algae growth. Sure enough the pellets allowed the bacteria to remove nitrates and phosphates. On my fish only system i only have to scrub them once a week and theres not that much to scrub. On my LPS/softy tanks i notcied that I catually have to add nutrrients back to the water for the corals, so far though no algae growth...the pellets destroyed(starved) my bryopsis and valonia I have in some frag tanks. Sean Link to comment Share on other sites More sharing options...
davidm December 13, 2010 Share December 13, 2010 I just installed mine last night so my question for those with more experience is: Do you have to add the bioactive enzymes sold in the market, or will the bacteria just present in your system likely work? Link to comment Share on other sites More sharing options...
F&Fmgr December 13, 2010 Share December 13, 2010 I dont think its a question of whether or not the bacteria in your tank will suffice, I would just watch your alk, pH and keep your skimmer runnin a lil wet for when it cycles/blooms. Sean Link to comment Share on other sites More sharing options...
guppychao December 13, 2010 Share December 13, 2010 can you place them in a phosban reactor? also how much do you use for a 50, 100, 200 gal system. if i was to fill up the phosban reactor (two little fishies) full, what is the capacity? Link to comment Share on other sites More sharing options...
Der ABT December 14, 2010 Share December 14, 2010 I use a TLF reactor right now and to get the right tumble you can only fill them up 2/3rds of the way and te tumble isnt great but i had it laying around. Ordering an Avast media reactor, 18 in mr5 tomorrow as ive seen them in action and they do a MUCH better job and hold more along the lines of what im looking for. i have a 150g, i know Justin and few others are better at suggestin amounts for different size tanks, Definately helped my algea problems especially in my main tank, i had no blooms, but do watch your alkalinity. Link to comment Share on other sites More sharing options...
zygote2k December 14, 2010 Share December 14, 2010 I either use them in mesh bags in a high flow area of the sump where the entire bag tumbles or I use them in an old phosban reactor. Either way , I'm only using about 2 cups. Link to comment Share on other sites More sharing options...
jamesbuf December 14, 2010 Author Share December 14, 2010 Do you guys run the outflow of the reactors directly into a protein skimmer, or just back into your tank/sump? Link to comment Share on other sites More sharing options...
Der ABT December 14, 2010 Share December 14, 2010 directly into skimmer for me, skimmate gets dark and nasty Link to comment Share on other sites More sharing options...
Amuze December 14, 2010 Share December 14, 2010 (edited) I may have to give this a shot... James, are you running a tank again? Is it that 48x48 you got from Naga? Edited December 14, 2010 by audible Link to comment Share on other sites More sharing options...
Larry Grenier January 24, 2011 Share January 24, 2011 I wanted to resurrect this thread to see if any of you have any updates on this. I Link to comment Share on other sites More sharing options...
dschflier January 24, 2011 Share January 24, 2011 I am curious if their is a difference based on different products bought. I am hoping to get my tank room opend by the Spring or summer and am deciding if it is something I will use. Link to comment Share on other sites More sharing options...
hypertech January 24, 2011 Share January 24, 2011 I've been running BRS pellets for a little more than two weeks now i think. Water seems a little clearer and skimmers seems a little darker, but nothing so dramatic I can point and say aha! The biopellets did it! Link to comment Share on other sites More sharing options...
overklok January 24, 2011 Share January 24, 2011 Be very careful adding BioPellets to an existing system. Once you get to ULN (Ultra Low Nutrient) levels, alkalinity becomes an issue. You have to make sure your alk hovers around 7.5kh, if it goes over 8 you will be looking at burned tips on SPS. My advise is to do water changes and massive skimming to keep nutrients low.Acceptable alkalinity in a ULNS is in such a narrow range 7-8kh, it leaves little room for flexibility when problems occur. Link to comment Share on other sites More sharing options...
F&Fmgr January 24, 2011 Share January 24, 2011 I am curious if their is a difference based on different products bought. I am hoping to get my tank room opend by the Spring or summer and am deciding if it is something I will use. The BRS stuff tends to take longer to fluidize and the Brightwell media...don't know of any difference other than that. I've been running BRS pellets for a little more than two weeks now i think. Water seems a little clearer and skimmers seems a little darker, but nothing so dramatic I can point and say aha! The biopellets did it! Took me about 4-5 weeks, then I noticed what the biopellets were doing. Be very careful adding BioPellets to an existing system. Once you get to ULN (Ultra Low Nutrient) levels, alkalinity becomes an issue. You have to make sure your alk hovers around 7.5kh, if it goes over 8 you will be looking at burned tips on SPS. My advise is to do water changes and massive skimming to keep nutrients low.Acceptable alkalinity in a ULNS is in such a narrow range 7-8kh, it leaves little room for flexibility when problems occur. +1 on low nutrients and alkalinity. I wouldn't use biopellets with ozone and/or UV on a small system(<250 gallons). Once the biopellets cycle through the po4 and no3 you should(this is based on my use and my experience with LNS) supplement with reef booster, zoecon, selcon, anything that will quickly turn into food for the bacteria w/o leaving alot of DOC in the water. When you get to this stage(where i am at right now), you should be able to maintain a higher alk and still maintain excellent polyps extension(b/c of the bacterioplankton now in your water column) and growth at the same time. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now