Jump to content

Recommended Posts

The technology is nothing new, basically the same as a standard MH that we use, just in a smaller package. It's the perfect size for a nano.

Sweet little fixture. That would be perfect for a nano. I wonder what the spectrum looks like on these.

 

I saw the the blue peaks at 536nm for the 8K and 456nm for the 12k. Isn't the sweet spot for blue around 430nm?

 

I saw a great post about a guy who build a DIY HID light setup for his reef using car bulbs but I can't find it now. The output look very focused, much like an LED setup with narrow angle lenses. Pretty cool.

There have already been some HID lights for aquarium use a few years back- I guess they didn't fare too well on the market. It's still 'old' tech- a gas filled bulb as opposed to 'new' tech- LED. Anything to attempt to gain a few dollars from the uninformed consumer.

LED is the future of lighting for the fish world and the rest of the lighting world. It's readily available in stores and is getting more affordable as each day goes by. HID is best used on automobiles and even there it is competing with LED.

That's exactly the lighting article I was thinking about. Thanks Coralhind

 

 

Sent from my iPhone using Tapatalk

Your Welcome!

 

The replacement bulbs cost about $50 bucks. That seems like a high yearly price to pay for only 35w of MH. I guess PlusRites have me spoiled.

I think of the Aquaticlife fixture when I heard HID fixtures.

 

I think this might be a good idea for the smaller nano's that can't handle the larger 70w halides. But now with led's becoming more affordable I still think they will be the main focus for a large part of our hobby.

 

There is always going to be some company trying to zero in on "the latest and greatest technology". I think that with led's there is so many ways that it can go, that we have not begun to really see there true potential.

If you really want to be on the cutting edge of lighting technology according to Sanjay Joshi from the Univercity of PA, the next gen lighting is going to be Plasma Bulbs. So if you must jump ahead and try to beat the masses thats what you need to look at.

john

If you really want to be on the cutting edge of lighting technology according to Sanjay Joshi from the Univercity of PA, the next gen lighting is going to be Plasma Bulbs. So if you must jump ahead and try to beat the masses thats what you need to look at.

john

 

 

Ha, Take that rob.!!!biggrin.gif

Ask and Ye shall receive:

 

Competitive Analysis

Fluorescent tubes

The most recent development from fluorescent tube manufacturers has been the T5 tube. Deliberately differentiated from its predecessors, the T8 and T12 lamps, by being manufactured in different lengths and therefore not reusable in existing fixtures, the T5 lamp technology, as with all fluorescent tubes, generates UV light from a low-pressure mercury-based discharge. This UV light impinges against tri-phosphor coatings on the inner glass wall of the tube, and by photo luminescent conversion within the excited phosphors, the UV is converted to visible light.

 

Measured within a laboratory test fixture, a T5 tube can produce high lumens/ Watt of electrical energy at the lamp at 35 degrees C, but when measured in assembled

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...