Highland Reefer June 15, 2008 June 15, 2008 Three weeks ago I installed a do-it-yourself refugium. At that time my nitrates were running between 15 - 25. For the first time in 6 months my nitrate level today is reading zero. My refugium was made from a 55 gallon Pepsi barrel, with 5.5 inches of sand on the bottom. I added lights and one fist size ball of Chaeto. Information to construct it was learned here at WAMAS. Cost: Sand - free from WAMAS Members Pepsi barrel - $5.00 (learned about them from WAMAS Lights - $30.00 from Home Depot (learned about them from WAMAS) Plumbing Fittings - $10.00 from Home Depot Chaeto - Free from WAMAS Members ------------------------------------------------------ Total Cost: $45.00 $20.00 for joining WAMAS paid for itself again & again. Thank you WAMAS for all the wonderful advice. I couldn't have done it without ya.
Highland Reefer June 15, 2008 Author June 15, 2008 I do agree though. This place is the best! I have to go to the store & buy some new batteries for my camera. I'll post some pictures later. Good point.
ctenophore June 15, 2008 June 15, 2008 What did you find at home depot that works like a bulkhead for the barrel? I've only used Uniseals and regular bulkheads, neither of which HD or Lowes sells.
Highland Reefer June 15, 2008 Author June 15, 2008 where did you get the pepsi barrel from? Hyattsville Pepsi Plant - Barrels are $5 each. Howard Turk, Recycling Coordinator, 301.583.7260 or 301.322.7000 WAMAS did a group buy a few months ago.
davelin315 June 15, 2008 June 15, 2008 What did you find at home depot that works like a bulkhead for the barrel? I've only used Uniseals and regular bulkheads, neither of which HD or Lowes sells. Don't know what Cliff used, but I have used male and female couplings with O rings on them. For me it was never a great substitute but it worked in a pinch. Also, I have used threaded male connectors and used a tap to thread a hole that matched. A little teflon tape on there and you're pretty good (or combine it with an O ring and female connector, too).
Highland Reefer June 15, 2008 Author June 15, 2008 What did you find at home depot that works like a bulkhead for the barrel? I've only used Uniseals and regular bulkheads, neither of which HD or Lowes sells. I used standard 2" PVC screw fittings (male & female) with one rubber O ring. After I tightened them to the barrel on each side, I applied Jurassic Paleobond glue to make it permanent. Works like a charm.
jason the filter freak June 15, 2008 June 15, 2008 pictures would be awesome good to hear you're getting your worth out of wamas
L8 2 RISE June 15, 2008 June 15, 2008 Hyattsville Pepsi Plant - Barrels are $5 each. Howard Turk, Recycling Coordinator, 301.583.7260 or 301.322.7000 WAMAS did a group buy a few months ago. did you get them shipped or what did you do?
CHUBAKAH June 15, 2008 June 15, 2008 did you get them shipped or what did you do? All your questions answered here on barrels.
MLazar June 15, 2008 June 15, 2008 (edited) Awesome Cliff. Does any know if there are any unclaimed/unused 55 gal barrels still available out there? Or anyone interested in sponsoring another group buy? With all the upcoming meetings and socials, this is the season for group buys/rades/sales of anything I suppose. Maureen sorry Cliff .......... didn't mean to hijack your thread................. Edited June 15, 2008 by MLazar
Highland Reefer June 15, 2008 Author June 15, 2008 Awesome Cliff. Does any know if there are any unclaimed/unused 55 gal barrels still available out there? Or anyone interested in sponsoring another group buy? With all the upcoming meetings and socials, this is the season for group buys/rades/sales of anything I suppose. Maureen sorry Cliff .......... didn't mean to hijack your thread................. I have one 55 gallon pepsi barrel left, which I do not need now. If you are interested let me know. I will be at the next meeting.
MLazar June 15, 2008 June 15, 2008 I have one 55 gallon pepsi barrel left, which I do not need now. If you are interested let me know. I will be at the next meeting. Cliff, Am definitely interested in the barrel, thanks much. Let me know what I owe you. Maureen
Highland Reefer June 15, 2008 Author June 15, 2008 Cliff, Am definitely interested in the barrel, thanks much. Let me know what I owe you. Maureen $5.00 for the barrel, which is what I paid for it. I'll bring it for you to the next meeting.
MLazar June 15, 2008 June 15, 2008 $5.00 for the barrel, which is what I paid for it. I'll bring it for you to the next meeting. Thanks much Cliff. I'll see you at BRK.
GaryL June 15, 2008 June 15, 2008 I have to go to the store & buy some new batteries for my camera. I'll post some pictures later. Good point. rechargable batteries are the best..last longer too..pays for themselves like the wamas membership
ctenophore June 16, 2008 June 16, 2008 Nice work. Too bad the poster of the General Lee is hidden by it though :( You might want to make a top that fits around the lights to protect against salt creep.
Highland Reefer June 16, 2008 Author June 16, 2008 Nice work. Too bad the poster of the General Lee is hidden by it though :( You might want to make a top that fits around the lights to protect against salt creep. The other wall has Daisy on it. I can take the top I cut off & fashion a top with it. I didn't think there would be a problem with salt creep.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now