fellterrier

White flex seal being applied. Sent from my iPhone using Tapatalk

Yes, a Aquabox Sump that I already have will go inside. I’m going to spray the entire inside with flex seal. Either clear or white. Probably white. Lol.... Sent from my iPhone using Tapatalk

Canopy is almost complete. The blue paint will be the final color for the whole thing. It will be aquamarine and sanded for a weathered look. I am happy with the way it’s turning out. Sent from my iPhone using Tapatalk

Me and my buddy are working on it. He’s actually better than me. I am doing things differently from lessons learned in the past. The doors will actually be panels that are held in place by magnets. Makes a huge difference when it comes to ease of access Sent from my iPhone using Tapatalk

Getting closer.... Sent from my iPhone using Tapatalk

I think that this is the best option and plan to plumb that way Sent from my iPhone using Tapatalk

I’m using the Herbie method so main flow will be through the primary return and a secondary line with a trickle. You guys know the drill. I’m thinking direct flow through UV should work. Thanks for the input. Flow inside the tank will be two Mp40’s and 2 WAV Pumps so overall flow should suffice.. Sent from my iPhone using Tapatalk

Thanks so much for the input. I’m thinking if I minimize all the bends I should be good to go with the setup flow wise. Sent from my iPhone using Tapatalk

Clarification. My return pump is a Vectra L2 rated at 3200 gph. The UV is a Lifeguard aquatics 55w. Per their instruction manual they recommend a flow rate of 2100 gph. Sent from my iPhone using Tapatalk

Option C would treat the Water with UV without it going into sump . The water would go from the UV to the return pump chamber. Sent from my iPhone using Tapatalk

Thanks for the input. With Option C I think I misspoke. What I was trying to say, was with a Y pipe coming off the return line going into the sump, controlled with a ball valve, divert water to the UV then to the return chamber back to the display. Sent from my iPhone using Tapatalk

Than Sent from my iPhone using Tapatalk

I’m trying to figure out the best way to install a UV for my new 300 gallon tank build. Option A would be with its own pump in the skimmer chamber of my sump with the water being dumped into the return pump area or Option B which would utilize a manifold coming off the return pump into the skimmer then back to the pump return chamber or lastly, Option C which would utilize a Y connection coming off the return line going to the sump then to the skimmer then to the return chamber. Thoughts? Sent from my iPhone using Tapatalk

Had to pause for a few weeks. Today I started on the panels. No doors as the panels will be held in place by magnets. This will definitely help with access to the sump. Pressed for time so between finishing the canopy and painting the whole thing I think I’m about 3 weeks away from completion. Slow going but the end result will be worth it.The struggle continues. Lol! Sent from my iPhone using Tapatalk

I got a sohal tang I’m going to sell in a couple of weeks when I do my tank breakdown. He’s rough and tumble Sent from my iPhone using Tapatalk

I’m keeping mine as a back up. They are awesome pumps and very reasonably priced Sent from my iPhone using Tapatalk

Doing a new tank and going with a vectra L2. However I been using a Jebao DC12000 on my 180 for years and it has been stellar. Quiet and reliable. Only reason I’m going with the vectra is I want web interface Sent from my iPhone using Tapatalk

15 gallon holding tank cleared up nice. Now I have to clean up my 72 gallon bow front Sent from my iPhone using Tapatalk

Thanks I’m trying to figure it out. Sent from my iPhone using Tapatalk

Framing for the stand complete. Next is the canopy, then the finish work and paint Sent from my iPhone using Tapatalk

Setting up my temporary tank for my inverts. I used live rock, crushed coral, and water from my existing system. Just set up so its clearing up. Love my cheap penguin hob filter. It does the job. Sent from my iPhone using Tapatalk

I have a diy radion rack that I bought used a few years ago. I want reuse it on my 300 tank build so I need to know what it is and where to get it. I need to extend it 2 feet. Any idea what it is? Sent from my iPhone using Tapatalk

96L 24h 30d Sent from my iPhone using Tapatalk

Finally got the framing done on the stand Sent from my iPhone using Tapatalk

Another shot Sent from my iPhone using Tapatalk