raulsreef October 31, 2019 October 31, 2019 I’m going to be renting the Par miter soon and would like to get some suggestions for para readings on my tank. I’ll have a picture below
madweazl October 31, 2019 October 31, 2019 If everything is doing well, dont change anything. PAR levels are good for a benchmark but not for arbitrary changes.
YHSublime October 31, 2019 October 31, 2019 If everything is doing well, dont change anything. PAR levels are good for a benchmark but not for arbitrary changes. This
raulsreef October 31, 2019 Author October 31, 2019 I am asking because I’ve been having issues with my Zoas Stretching but also seeming like they are getting too much light by closing it’s polyp. I still have several colonies that are not opening. I have checked with my parameters and water flow for several weeks. lighting is the only thing that is making a difference from what I’ve Gathered
YHSublime October 31, 2019 October 31, 2019 I’d slowly crank up the lights 1-2% per week. I left my lights on 100% accidentally for 3 days (normally they max at 70%.) I noticed before my corals did, they all loved it! I’m slowly cranking up past 70% now that I know!
AlanM October 31, 2019 October 31, 2019 You have email, by the way. I have the PAR meter back and can send it to you.
YHSublime November 2, 2019 November 2, 2019 I’d ramp up to 50% at least pretty quickly if those numbers are correct. I would also take your par levels at a higher percentage with your current light.Sent from my iPhone using Tapatalk
AlanM November 2, 2019 November 2, 2019 I agree. I also suggest you put brightness and cool white at 100 percent briefly and turn off powerheads and pumps and do some measurements to see what your upper limit would be. An hour of high light won’t hurt anything.
raulsreef November 2, 2019 Author November 2, 2019 I will take more readings with your suggestion and post them later today
raulsreef November 2, 2019 Author November 2, 2019 The picture might look dim but I took the par readings with the settings I’ve posted. The picture does not reflect the setting when I took the readings. Just so you know I am using worldwide corals Radion settings
raulsreef November 2, 2019 Author November 2, 2019 This is my par reading at 100% intensity with the last setting use. Worldwide coral settings
AlanM November 2, 2019 November 2, 2019 Seems legit. Wonder what it would be with more cool white. That's probably a decent amount of PAR not going in to the tank by leaving them so low. I always liked a whiter look. I understand that is what WWC says, though.
raulsreef November 2, 2019 Author November 2, 2019 In the beginning of the day it is a fairly white look the other half of the day is primarily blue. I guess I would need to acclimate my think now
raulsreef November 2, 2019 Author November 2, 2019 This is also with the pump and the wave maker turned off
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now