Need to borrow a 2" diamond hole saw bit

[steveoutlaw]

I need to drill my sump for a 2" bulkhead. Anyone have a bit I can use?

[Der ABT]

pretty sure i only have a 1 ior 1.5 but lemme double check

[epleeds]

I might have one at home but will not know till tonight. Are you putting a 2" bulkead? I would think you would need bigger then a 2" hole for a 2" bulkhead.

[BowieReefer84]

You need a 75mm hole saw according to BRS for a 2" abs bulkhead. According to google that is 2.95".

 

http://www.bulkreefsupply.com/diamond-coated-glass-drill-bits.html

[rocko918]

If you are fitting a 2 inch bulk head then i have a bit. Will check when i get home.

[onux20]

^^^^ me too.

[zygote2k]

I have one if the others can't find theirs.

[onux20]

82mm hole saw. Only drilled one hole with it. LMK

 

Ron

[matt]

if you decide to go smaller I have a 1.75 inch hole saw from glass-holes...but that was recommended for the 1 inch bulkhead in my overflow box. only putting it out there cuz I'm not far away

[Brian Ward]

If you need a bit for glass I have one. Don't think I have one for acrylic that big.

[Steve175]

Dude: Drillin' grass or acryllic?

[steveoutlaw]

Drilling glass. Corsi brought one over for me, so thanks everyone.

[Steve175]

(whoops typo: I meant glass not grass . . . Freudian slip perhaps as I'm skiing in Colorado next month)