altezza

how do you know which membrane to buy? i got a ro system from somebody , there is no name on it so i have no clue on how to pick out a membrane..

do you have a web site i can go to? i need to buy another membrane..mine is going bad

mannnnn you lucky !!!

wow great digi skill !!!

i've seen this before..simply amazing. !

thats cheap !!! only $20 bucks for that?

cool..i feel much better now..thanks for the fast responds guys.

I got a 75gal with a 25gal sump...this tank is located on the second floor..and i was wondering with all the weight of water, rocks, sand, canopy, stand...will my floor be ok with this weight? I believed i read it RC that 1 gal of water = 8.5lb

Ok i think i got it. Thanks

Ok here is the question: Do i have to add another wire to connect from Socket A to Socket B? or one single yellow wire is enough? I did try to plug in without adding any wire from Socket A and B and it works. But the instruction on the ballast it shows that there is another wire going from A to B. So two wire total...it works fine just single yellow wire, but i just want to make sure before i connect everything up.. Thanks

Here you go http://www.drsfostersmith.com/product/prod...p;N=0&Nty=1

I did not lose any zoas with Furan 2 at all. They are opening up very nice now.

Phisigs79, I have been battling with this pox for a while too. I have been experimenting with Furan 2, a med that fight against fungus. I use this med to fight against fungus when i used to breed Discus (freshwater fish). Alot of people in RC are dealing with this. You should check out this link: http://www.reefcentral.com/forums/showthre...mp;pagenumber=1 This is what I wrote over RC: Ok guys here is the summary of my experience with Furan. Here is what you need. 1 cup of RO water. 1 capsule of Furan and 1 extra cup of your tank water ( this is used to wash the zoas before put it back in your main tank after the treatment, I do this because I dont want to risk Furan from killing any of my fish and other corals). Procedure: Match the temp of your RO and PH level to your current tank. Mix 1 capsule into RO cup and mix it good until RO water turn green. After the dip, wash the zoas in your tank water on the other cup you had put aside. Then put the zoas back in the tank where there is a stronger flow. Do three treatment in a row then let it rest for exactly one week, then continue with another three treatment. Repeat if your zoas are not improving. Keep in mind, during the treatment I slowly increase my temp from 78 to 81-82. Furan works best in higher heat. But I would not go over 82. In freshwater I bump it up to 84-86 for Furan treatment. I also increase my water change from 5 gal per week to 10 gal every 3 days. Here is what I did on my zoas: 1st WEEK 1st treatment started with 3 min dip 2nd treatment started with 5 min dip 3rd treatment started with 7 min dip Rest for 1 week 2nd WEEK 4th treatment started with 10 min dip 5th treatment started with 15 min dip 6th treatment started with 20 min dip I will give it another week to rest then will continue if there are still white bumps on my zoas. So far my mean green is looking great..most of the bumps have cleared. I will take an update pics for you guys later tonight. I must say, this procedure has worked for me, it might not work for you. So please do this at your own risk. Thanks

just called Perfecto....75gal is drillable...just not on the bottom ofcourse.

thanks for the advice guys

Sorry Steve for hijacking your thread but how high is it for T5?

75 gal Perfecto. At the bottom it said Tempered Glass do not drill, but can i drill on the back or sides? It also said Build by Perfecto April 01 MJG any ideas? maybe i should go with overflow box if i cant drill this thing.

wow ...you must be rich...i just found out how much it cost

I was just there yesterday and yes they are setting up a new section for saltwater, which used to be their office. Looks like everything is going good so far, I'll come back next week to see their progresses.

me three !!!

Thanks for the advice guys.

How do you configure to lights to go on and off, which bulbs needs to go on and what bulbs need to go off at a certain time? i have the following can anybody recommend a setting for me? ATI Blue Plus UVL Super Actinic UVL Aquasun ATI Aquablue UVL Actinic White ATI Blue Plus Thanks

i had to watch it twice...simply amazing !!!!

Gaithersburg, MD here

what kind of digi cam you got?