Josh&Sarah February 23, 2021 Share February 23, 2021 Please help. My return pump stopped and now overflow drains leaking hook up is M1 style! Link to comment Share on other sites More sharing options...
CallMeJus February 23, 2021 Share February 23, 2021 I’ve got a brand new Jebao DCP-6500. Located in Woodbridge. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
YHSublime February 23, 2021 Share February 23, 2021 I’m in MD, but I’ve got a RO V2 you can borrow Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 Wheeew. Step one.. I rigged up my mixing station pump. And got something going. Can we move this thread so we can work through this. I need support! Link to comment Share on other sites More sharing options...
YHSublime February 23, 2021 Share February 23, 2021 Moved into “general”, let us know what you need. Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 A million thanks to everyone who offered help. I scramble like crazy making fittings that would work with my AC mixing station pump. I had leaking coming through the bulkhead where the return is plumbed. Probably from trying to manipulate the pump before I disconnected from the union. I still have a drip but not as bad. My channel locks don’t fit up there well to tighten. Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 I do not need this right now! Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 Any creative ideas about how to tighten this bulkhead? It’s tight up there. Link to comment Share on other sites More sharing options...
YHSublime February 23, 2021 Share February 23, 2021 Keep trying to hand tighten to stop the leak, I can’t tell from the photos, but if you can turn the plumbing, you can always tighten it up that way.As for the pump, I wouldn’t sweat it, move your heater into the DT over night, get your wave makers to keep the water agitated or moving (which you’re probably already doing) and then call it Tuesday’s business. If you have the ability to, and a small MJ or pump about, I’d consider making some NSW for a water change, just bc it never hurts. Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 My mixing station pump has plenty of power fortunately.... it was used to move water from station to tank inside. So it’s moving plenty of water through sump. Hand tightening is out on the bulkhead I think. I might hunt for different C locks. This stupid M1. At least I know my emergency procedure now. I had to cut tubing, make fittings. It was crazy! Now I start making WC Water 100% Link to comment Share on other sites More sharing options...
YHSublime February 23, 2021 Share February 23, 2021 I guess what I’m saying is if you can’t get the bulk head tightened tonight, it always an option to run sumpless for a night Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 I don’t think I have the supplies to risk getting into it. I have to think about what I need to do. When I plumbed it I really made life difficult. Lesson learned. Everything is accessible but the bulkheads. Hopefully some creep seals it up some in the meantime. Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 I have an extra powerhead I can use to mix some salt. Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 Now I gotta figure out what return pump to get. Thinking AC now. Thank goodness for my sicce mixing station pump. I could by 2 more of those and always have a spare and still come out cheaper than an echotech. Not sure on the power savings. Link to comment Share on other sites More sharing options...
TomBradley412 February 23, 2021 Share February 23, 2021 Try using a strap wrench, the style that you’d use to take on and off an oil filter. I have a few different sizes if you need to borrow one. located in Burke. Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 Thanks Tom. I think it stopped. If it didn’t it’s dripping once every 2 hours. Man.... what an adventure. I just finished doing all kinds of stuff and got all cleaned up. All proud of the tank and boom.... M1 won’t turn. I took it apart looked great. Tried different power source. Nothing. I’m going to an AC pump. I’ll probably get a bit bigger sicce “silent” and call it good. Then I will always have my mixing station pump as a backup. I never used any of the features on my ecotech anyway. I’m stable. Going to SLEEP. thanks guys. Appreciate it. Tomorrow I pump shop. Link to comment Share on other sites More sharing options...
wildcrazyjoker81 February 23, 2021 Share February 23, 2021 Glad you got it figured out. I know everyone likes their DC controllable pumps, but this is one are that has always scared me with return pumps specifically. My mag pumps haven't failed me in many many years. I second the oil strap for this tight spot. Did you glue in the piping portion in the overflow box? If so maybe you could try and twist that while someone helps make sure the bottom doesn't move too. Link to comment Share on other sites More sharing options...
Josh&Sarah February 23, 2021 Author Share February 23, 2021 I did not. It’s a tight overflow and the lid slides tightly under eurobracing. I didn’t glue inside for maintenance purposes. It’s a T pipe anyway.... middle pipe is return and Ts over herbie. It seems to have stopped. I’m just gonna be careful and not touch it. Now I need a new pump. I think I might just grab a sicce but one a bit bigger than mixing station. Link to comment Share on other sites More sharing options...
Josh&Sarah February 26, 2021 Author Share February 26, 2021 All better. 4.0 running dead silent. No power brick, no multiple wires, no controler, no worries. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now