Anemone May 14, 2016 Share May 14, 2016 So, I've got my stand built. Inside the bottom is a piece of plywood right on the floor and it's cut to fit exactly inside the frame. I'd like to seal things up so any spills won't get through and damage the floor underneath. I'm thinking of using a paintable latex caulk to fill in all the edges and corners to make a seal. Then paint everything with 2 or 3 coats of primer (Kilz brand). Am I on the right track here? The other idea I think I read was to tack up a small pond liner inside. Or maybe both? Link to comment Share on other sites More sharing options...
ronl May 14, 2016 Share May 14, 2016 I did the same...paintable caulk and 3 coats of Kilz primer, but then I finished it with 3 coats of Rust-Oleum Appliance Epoxy spray paint. Leaves a nice hard finish like the side of a refrigerator. Link to comment Share on other sites More sharing options...
Anemone May 14, 2016 Author Share May 14, 2016 Appliance epoxy spray... Nice idea. Does anyone have a good story about just how well this all works? E.g., you find two inches of standing water happily waiting for you in the sump? Seems like the pond liner would be certain to work in this situation, how does the paint and caulk compare? Link to comment Share on other sites More sharing options...
Sad Panda June 10, 2016 Share June 10, 2016 (edited) I did exactly that. Had only one accidental spill (luckily no livestock was in place yet) which it contained nicely. (The caulk and 3 coats of Killz method) I can say it will hold a lot of water for at least 24 hours. Here is a picture as I built my stand. Edited June 10, 2016 by Sad Panda Link to comment Share on other sites More sharing options...
Anemone June 12, 2016 Author Share June 12, 2016 Very good to know! I'll try to remember to place a water sensor in there too. Link to comment Share on other sites More sharing options...
Sad Panda June 12, 2016 Share June 12, 2016 Oh yes I have an apex leak detector in it. Link to comment Share on other sites More sharing options...
madweazl June 15, 2016 Share June 15, 2016 A product called Redgard is made for exactly this reason and it works very well; easy to apply and easy to paint over as well. Link to comment Share on other sites More sharing options...
matt June 16, 2016 Share June 16, 2016 You could also get rubber shower pan liner or similar rubber material and attach. I got the stand for my 90g used, but the prior owner had done something like this and it has saved me some headaches once already Link to comment Share on other sites More sharing options...
Anemone June 21, 2016 Author Share June 21, 2016 Thanks for the input. I've started with the caulk. Hard to find the time with a new house full of projects. I should have asked, if the painting and liner are equally good for containing leaks, but the liner is faster to install (true?) maybe I should switch over to a liner just for time savings. Comments? Link to comment Share on other sites More sharing options...
Sad Panda June 21, 2016 Share June 21, 2016 if you have the time and money you can never go wrong using both for added protection. But then again I'm paranoid. Link to comment Share on other sites More sharing options...
treesprite June 25, 2016 Share June 25, 2016 Thanks for the input. I've started with the caulk. Hard to find the time with a new house full of projects. I should have asked, if the painting and liner are equally good for containing leaks, but the liner is faster to install (true?) maybe I should switch over to a liner just for time savings. Comments? Shouldn't the aquarium project take priority? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now