Scubaguy January 13, 2015 Share January 13, 2015 gOOD MORNING EVERYONE, Just wondering if anyone has any experience with this pump. And want to open a discussion about how much water movement I will need from SUMP to TANK. I am installing a 280 Gallon Tank and am trying to figure out a pump for the sump. Thoughts? Suggestions? Rich PUMP SPECIFICATIONS: Input-Power: 110V / 60Hz Power Consumption: 65W Input: 1.25" (32mm) Output: 1" (25mm) Flow: 1584 GPH (6000LPH) Pressure: 8 Ft (2.5 meters) Height: 6.8" (17 cm) Width: 4.15" (10.5 cm) Length: 7.9" (20 cm) Link to comment Share on other sites More sharing options...
epleeds January 13, 2015 Share January 13, 2015 Seems like a lot of money for a pump and a lot of other options out there that are probably half that cost but I know nothing about that pump. Link to comment Share on other sites More sharing options...
s2nhle January 13, 2015 Share January 13, 2015 I have no experience on this pump. base on the spec above, it is a little bit over 5x turn over (1400gph) however if you calculated the height that it have to pump the water up IMO it is about right. Have consider other alternative pump? Link to comment Share on other sites More sharing options...
Scubaguy January 14, 2015 Author Share January 14, 2015 I have no experience on this pump. base on the spec above, it is a little bit over 5x turn over (1400gph) however if you calculated the height that it have to pump the water up IMO it is about right. Have consider other alternative pump? Thanks for the feed back... I ended up going with the SICCE SYNCRA HF 12.0 PUMP (3200 GPH) And ordering a complete APEX Gold with a couple of extras. Stand is getting built this weekend. The insanity begins...Pictures will follow soon... Rich Link to comment Share on other sites More sharing options...
s2nhle January 14, 2015 Share January 14, 2015 Do you have a build thread? Link to comment Share on other sites More sharing options...
Scubaguy January 16, 2015 Author Share January 16, 2015 Do you have a build thread? No I will do it soon. Nothing to show yet except the room that i have painted and hung up my Capitals memorabilia ... Will do some images of the stand build this weekend. going out to buy wood today.. Link to comment Share on other sites More sharing options...
zygote2k January 17, 2015 Share January 17, 2015 Mag 18 or 24 works. Link to comment Share on other sites More sharing options...
DuffyGeos January 17, 2015 Share January 17, 2015 Not a common pump. Ps- Good job joining! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now