Jump to content

Recommended Posts

Ok so I'm stuck! I came back from the beach and my mini bubble king 200 is not working. I took it apart and cleaned it. it had some calcium deposits on it,but it was not to bad! It had 3 missing teeth on the needle wheel but it should still work. the impeller seems ok as well. so What can I do. it will take weeks to get a new motor or impeller. but what if I do not need a impleler? a wast of 150-$180. I love this skimmer and need a very short one to go under my set-up(one reason I got this one). any ideas?

Thanks Curtis

sounds like your pump fried. I don't think you have many choices here- new pump with or without an impeller.

I thought that those skimmers used the Red Dragon pumps which are warrantied for just about anything that could happen.

[/quot

I did buy it at the MACNA in Pa about 3 years ago so we will see what kind of warranty they have!

Does the pump vibrate at all when plugged in? If not then the issue is probably with the motor. It is does vibrate then the impeller needs to be looked at. The main item is to make sure the rear bearing is seated correctly.

 

Here are the directions in case you need them: http://www.royal-exclusiv.de/forum/wbboard/attachments/00000000003/Bedienungsanleitung%20und%20Wartungsanleitung%20Mini%20BK%208%2007_gb.pdf

 

As Dave said, I would see if the Red Dragon pump is covered, maybe not under warranty, but they did have a big recall last year on several models.

 

 

Also, I would describe this situation over at the Bubble King Skimmer Club thread over at RC. http://www.reefcentral.org/forums/showpost.php?p=17449964&postcount=586

 

It appears a laguna/ askoll 1500 is a replacement pump that you should be able to get faster then a Red Dragon.

It sounds like they have a 3 year warranty and I bought it 3 years ago this MACNA. I will see how good this turns out.I sent my pump to the dealer I bought it from two day FED-EX so we will see! I hope it's not as bad as I hear on some of these fourms. at the time I wanted one of the best skimmers on the market and one that was small enough for the footprint. I seemed high,but after i picked it up and felt it I wanted it. It's a very heavy duty skimmer and seems overbuilt 2 things I like.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...