treesprite June 7, 2010 Share June 7, 2010 I found this stuff Motsenbocker's Lift Off ® "Silicone Latex Caulk and Foam Sealant Remover". I need to get the silicone residue off my glass from installing the overflow, and am wondering if this stuff would be ok to use on the inside of the glass. I don't see ingredients on the bottle, but it says it is "water-based and biodegradable". Link to comment Share on other sites More sharing options...
Coral Hind June 7, 2010 Share June 7, 2010 Can't you use a simple razor blade to remove the silicone? MSDS: http://media.qualitydist.net/misc/msds/mbr-411-45.pdf Link to comment Share on other sites More sharing options...
Origami June 7, 2010 Share June 7, 2010 The MSDS from the manufacturer is located here: http://www.liftoffinc.com/my_files/mlo-msdsfsr.pdf The MSDS lists a "trade secret ingredient" that does not allow for a determination of safety. However, the MSDS does note that it does not contain any ingredients on the Superfund list of toxic chemicals (small consolation) and that, in small amounts, may be flushed into the sewer. Scraping would be my first choice. Link to comment Share on other sites More sharing options...
Charlie June 7, 2010 Share June 7, 2010 I would certainly scrap the glass. It should come off fairly easily since glass is non-porous. I guess it would be better than rubbing the area with a gasoline soaked rag, in your living room, with a lit cigarette. (I'm kidding, I wouldn't do that either, I don't think that cigarettes are reef safe). Just scrap it carefully with a razor and you should be fine. Link to comment Share on other sites More sharing options...
treesprite June 9, 2010 Author Share June 9, 2010 I didn't use it, not on outside either. Actually, I thought some of the loose bits of silicone were stuck on, but they weren't. Maybe it will come in handy for something in the future. Link to comment Share on other sites More sharing options...
Coral Hind June 9, 2010 Share June 9, 2010 So it sounds like you removed the overflow you had just put in and drilled. Why? Link to comment Share on other sites More sharing options...
treesprite June 10, 2010 Author Share June 10, 2010 Took it out, then drilled it, then replaced it. Got messy with the silicone. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now