DCDeacon December 6, 2004 December 6, 2004 I'm making a sump/fuge out of a 30 gallon tank. I can get the square pieces for the baffles, but I want one piece to have teeth on the top of it to use in separating the fuge from the return area, to keep any algae or critters from getting out into the pump area. I wondered if anyone had a router or some other tool and could do this for me. I can always get a piece like this from glasscages.com, but before going through the trouble of ordering, etc., I thought I'd check locally to see if someone could help me out. Anyone?
HowardofNOVA December 6, 2004 December 6, 2004 Pete, Dittos on the need to build a sump, check on my design I just put in the Gallery under Tank Setups? I was going to do one at my place off Rt 50 and the beltway in the next week or so for my 29g refugium and 20g sump Howard
rocko918 December 7, 2004 December 7, 2004 What would you need to cut acryllic? I have alot of tools just never cut Acryllic. Bob
DCDeacon December 7, 2004 Author December 7, 2004 Basically you need a router and a template. You can see what I'm looking to do here: http://www.melevsreef.com/acrylics/teeth.html
rocko918 December 7, 2004 December 7, 2004 Hmm don't have a router right now, might have one after the holidays!!!
HowardofNOVA December 7, 2004 December 7, 2004 Doug, I believe I have at worst access to one, but thinking of getting a setup from Santa! I have jigsaws, circular saws, hacksaws, see-saws now Howard
Guest Ruh Roh December 10, 2004 December 10, 2004 If you don't get the router thing locked in I can do it in my free time at work with the laser. I can't cut anything bigger than 2x3' But if you want to draw the lines on the piece I could cut the teeth out with the bandsaw if they can be square shaped teeth. If you get a router it'd probably be quicker and you could round the bottom of the teeth a little.
HowardofNOVA December 16, 2004 December 16, 2004 RuhRoh, I got my 29g tank that I'm going to use as a sump/refugium. I have a piece of glass and a piece of vinyl that should work great for creating the dividers. Can you cut these with the laser to make slits for the overflows? Call me when you available and I can bring them to you if that is ok? Howard
HowardofNOVA December 27, 2004 December 27, 2004 Hey, Did anyone have a router? Was looking into cutting slots for sump into acrylic and the more I was thinking about do it just with a coping saw, the more I realize, I just might want to invest in a router ??? I got a sheet of glass and acrylic, just got to get it cut. Howard
flowerseller December 27, 2004 December 27, 2004 Howard, I have a router you can use at my house. Chip
DCDeacon December 27, 2004 Author December 27, 2004 Chip, have you ever cut acryllic with it? Howard and I both need to cut some teeth in a piece of acryllic for use in a sump.
HowardofNOVA December 27, 2004 December 27, 2004 WOOD? Are you Chip or Splinter? :D Hey sir, I'm heading to the house, will give you call later if your available? Howard
flowerseller December 28, 2004 December 28, 2004 Howard, I found some plastic and am going to be cutting out and glueing my CA reactor over the next couple evenings. You can stop by and use the router since I'll have it out and be using it myself. I'm sure I have a bit that will work for what you're doing. Measure twice. Chip
Guest Ruh Roh December 28, 2004 December 28, 2004 Howard, I am sorry I missed your post, never even saw it here with the holidays and all. I apoligize. I would be happy to help with the dividers should be a really quick easy thing here. I would need to know the size of your divider and about how big the slots or how many you want along which edge. Then I can draw it up and zip it out. The router works well as well you remember how we zipped through the circles of the acrylic with it right? Give me a call on my Cell during the day or at home in the evenings. 703-477-3964 -Cell 703-204-1985 - Home
DCDeacon December 28, 2004 Author December 28, 2004 Ruh Roh, you going to be around tonight that I could come by and cut teeth in my acryllic? I have a piece that is 11 1/2 inches wide and I just want to cut some teeth along the top at regular intervals. I figure they'll be about 1/4 inch wide or so, spaced out with a 1/2 inch in between them. About 1 inch deep. Is that something you can do?
Reef7855 December 28, 2004 December 28, 2004 For what your going to do a router is what you will want to use. If you are cutting 1/4" or less you can also use a good laminate trimmer to make your cuts.
flowerseller December 28, 2004 December 28, 2004 I realize that the teeth look cool but why can't the water simply spill over the top edge like on an overflow box? Teeth get clogged and make a louder spill. The circle cutter I have could be used as a groove guide if you feel you need the teeth.
DCDeacon December 28, 2004 Author December 28, 2004 Mostly because I've heard it's beneficial in keeping critters in the refugium and out of the pump area, not to mention keeping algae from washing over to the pump area. I'm really doing it for function, not for looks.
HowardofNOVA December 28, 2004 December 28, 2004 Chip, If your around tonight, I'll give you a call and stop in to get it done? Pete, I'm not going to use a template or anything, just free hand it. If your not picky, maybe you could drop off your material and a paper sketch of your needs after work and I can cut it while I'm at Chips if that is ok with all? As you saw last night, I'm only using 1/8" sheet of acrylic for divider and overflows. Howard
DCDeacon December 28, 2004 Author December 28, 2004 Howard, I've got my acryllic with me here at work, as I picked it up at Piedmont on the way in today. I'd be happy to drop it off and have you do it "freehand" if you're willing to do so, and I'll swing by after you're done and pick it up. That'll give me time to get the rest of the sump done. Lemme know what time you'll be home and I'll drop it off.
HowardofNOVA December 28, 2004 December 28, 2004 I should be home around 7, if you come early, leave it by my door with drawings of what you want done. Cell 703-899-6209, I actually have it with me today. Howard
flowerseller December 28, 2004 December 28, 2004 I should be home unless Sonya drags me out somewhere. The other guy that needs it cut can come too. I plan to work on my CA reactor tonight anyways, except she takes presidence. Chip
HowardofNOVA December 28, 2004 December 28, 2004 Ah, Sure, you can spend time with her, but us, we got to play second fiddle! GEEZZZZ! Well maybe we will see you and maybe we won't! [hro
flowerseller December 28, 2004 December 28, 2004 yeah right pal, I'm not the one who wants something cut mr second fiddler. GEEZZZZ, .........sounds like you been hanging around Wally and the "Beav" a little too long. Call me later, it'll give me a reason to stay home.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now