Jump to content

Recommended Posts

I have 2 dollys to set the tank on right now, both rated for 1000lbs. The tank is probably about 300-400lbs, and is 5'x3'.

 

Can I set the tank down with dolly's on either side, or would it be best to put it on a blanket until I can get a piece of plywood to distribute the weight? 

Took me a second but I think I understand. You are either putting each end of the tank on a dolly, or abandoning them for the moment and putting them on the floor?

This was an empty tank right?

How big are the Dolly's? Rimless tank I assume?

Sent from my SM-G970U1 using Tapatalk

2 hours ago, ImGoingCoastal said:

Took me a second but I think I understand. You are either putting each end of the tank on a dolly, or abandoning them for the moment and putting them on the floor?

This was an empty tank right?

How big are the Dolly's? Rimless tank I assume?

Sent from my SM-G970U1 using Tapatalk
 

 

Talking about putting 2 dolly's on either end of the tank (underneath it, not just sitting beside it, lol).

Currently the tank is on the floor, on a sheet, which isn't really doing much other than keeping it from the low possibility of scratches on the bottom. 

The dollys are 18"x30" with a 1000lb capacity each. 

53 minutes ago, madweazl said:

The 150g sat like this for a year and a half (holding water just fine now).

 

Fair, I also forgot how much I loved that photo.

We lost the little dude (Opie) on the left about a year ago, it sucked. For what it's worth, that tank is a hair under 300lbs so if you're a foot wider, the glass is likely quite a bit thicker and quite a bit heavier (I still dont think it would be an issue but if you were worried about it, you could drop a 3/4" piece of plywood under it). 

We lost the little dude (Opie) on the left about a year ago, it sucked. For what it's worth, that tank is a hair under 300lbs so if you're a foot wider, the glass is likely quite a bit thicker and quite a bit heavier (I still dont think it would be an issue but if you were worried about it, you could drop a 3/4" piece of plywood under it). 


Ah, that’s a bummer. My guys are getting up there in age, I’ll be out of commission for a while when we get there.

It looks like yours almost covers the whole bottom. The tank is 5’x3’ so I’m not sure how to position them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...