gmerek2 December 21, 2018 Share December 21, 2018 I noticed yesterday my ATI middle bulbs are out. I don’t have time to work on it right now just wondering if anyone has seen this Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
YHSublime December 21, 2018 Share December 21, 2018 Are they on their own channel? I had a BNIB ATI that needed a ballast. Of course the easy fix is to always just swap a bulb in first! Good news is, no matter what the issue, it should be an easy fix, so long as you have the tiniest of hex wrenches laying about, haha. Link to comment Share on other sites More sharing options...
gmerek2 December 21, 2018 Author Share December 21, 2018 Are they on their own channel? I had a BNIB ATI that needed a ballast. Of course the easy fix is to always just swap a bulb in first! Good news is, no matter what the issue, it should be an easy fix, so long as you have the tiniest of hex wrenches laying about, haha. 6bulbs are on that circuit two bulbs are on the other one. Is it odd that the other 4 bulbs are still working?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
gmerek2 December 21, 2018 Author Share December 21, 2018 Uhg 2 old bulbs no go. The glow plugs aren’t firing and lights aren’t doing anything Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
gmerek2 December 21, 2018 Author Share December 21, 2018 I assume the ballast fires the glow starter plugs? I don’t know how any of this works obviously lolSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
RW09903 December 22, 2018 Share December 22, 2018 Do you have the regular type, or dimmable? My ATI fixture had the same issue a few years ago. I had to take off the case and change the ballast. No issues since. Wiring it was pretty easy as long as you orient the new ballast the same way and replace one wire at a time. Link to comment Share on other sites More sharing options...
gmerek2 December 22, 2018 Author Share December 22, 2018 Do you have the regular type, or dimmable? My ATI fixture had the same issue a few years ago. I had to take off the case and change the ballast. No issues since. Wiring it was pretty easy as long as you orient the new ballast the same way and replace one wire at a time. Non dimmable. It’s the ballast unfortunately. Will watch YouTube videos on how to do it. Not looking forward to itSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
gioNVA December 22, 2018 Share December 22, 2018 Had the same issue a while back and it was a bad ballast. Not too hard to replace. Link to comment Share on other sites More sharing options...
gmerek2 December 22, 2018 Author Share December 22, 2018 Had the same issue a while back and it was a bad ballast. Not too hard to replace. Do you buy off aquarium specialty store or for the hardware shop ones workSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
RW09903 December 22, 2018 Share December 22, 2018 (edited) I ordered my ballasts via ERC. On a pinch, I can check to see if I still have a spare you can use (80w). Unfortunately, I'm in Crofton, Md though. Edited December 22, 2018 by RW09903 Link to comment Share on other sites More sharing options...
gmerek2 December 22, 2018 Author Share December 22, 2018 I ordered my ballasts via ERC. On a pinch, I can check to see if I still have a spare you can use (80w). Unfortunately, I'm in Crofton, Md though. Glad you said something I just happen to be going to Marcos house tomorrow I’ll contact him now to see if he has any extra. Let me know if you have extra just in case it would be nice to get itdone before the holidaysSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
gioNVA December 23, 2018 Share December 23, 2018 14 hours ago, gmerek2 said: Do you buy off aquarium specialty store or for the hardware shop ones work I got them from ERC. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now