RODI recommendation

[lutz123]

We're in need of a new rodi.  The frame on our AWI is completely rusted out under the paint.  We never noticed water contact the frame in any way though common sense says it likely did here and there.  AWI informed me that they still use the same frame as they always did and didn't offer any assurances on whether a new one would be any better so I'd prefer to go with a different brand.  Yes, I realize this is used around water but it's an eyesore and the integrity seems compromised.  Thanks!

 

Please move this to a different section if this isn't appropriate...

[flooddc]

You meant the metal bracket?

if your unit still working fine. you can replace just the bracket. I believed they are universal. 

https://www.bulkreefsupply.com/triple-bracket-for-standard-10-canisters-z-style.html

[Origami]

I think that every RO/DI bracket that I've seen used near saltwater setups eventually suffers rust. I'd probably do what Chuck suggested: Get a new bracket (if it's anything more than surface rust - otherwise sand and repaint it). If you want, you can scuff the new bracket and add another couple of coats of epoxy paint to it just to beef up the protection. While you're at it, clean or get new screws since they may be looking bad, too. Zinc coated screws will hold their look longer.

[lutz123]

Good suggestion - not sure why I didn't consider that the bracket could be replaced, or is universal.  I'm a wee bit intimidated but taking pictures before disassembling should help.  I still wish the vendor had offered that suggestion.  Not surface rust - I'll definitely put a coat or two on the new bracket.