Jump to content

2.5G Nano @ Champion Lighting Booth/MACNA


Guest Keyoke

Recommended Posts

Guest Keyoke

I was very, very taken with this tank and now I feel I must own one.

 

I've done some quick looking, and can't seem to find any of those teeny square tanks. Anyone know where I can find one?

Link to comment
Share on other sites

Not sure where you can get one, but did u notice that it was it with LED lighting. Cool huh...

 

 

I was very, very taken with this tank and now I feel I must own one.

 

I've done some quick looking, and can't seem to find any of those teeny square tanks. Anyone know where I can find one?

39117[/snapback]

Link to comment
Share on other sites

Guest Keyoke

Yeah, I think that's one of the things that got me so interested.

 

I managed to figure out the mfgr of the LED "Ballasts" that were used - looks like they were Advance SignPRO kits -- http://www.advancetransformer.com/products/led.jsp?pbid=32

 

LEDs are a little more tricky, though I noticed that they seemed to be mounted on individualized PCBs. Aside from mounting, there's no other real need for a PCB, and the LEDs didn't look surface mount.

 

I found two different likely candidates for the LEDS -- Led Dynamics Io and ELARA emiiters

http://www.leddynamics.com/LuxDrive/datash...-Elara-Moon.pdf -- Elara

http://www.leddynamics.com/LuxDrive/datash...020-Io-Moon.pdf -- Io

 

Or the Luxeon STAR series -

http://lib1.store.vip.sc5.yahoo.com/lib/le...xeon-StarVC.pdf -- For colored LEDs

(Note that the BLUE peaks at 470nm, which is pretty spiffy as a Actinic/03 replacement)

 

http://lib1.store.vip.sc5.yahoo.com/lib/le...xeon-StarVW.pdf -- for the White LEDs

(Note that these seem to sit at the 5500K Range on avg, but can max @ 10K, spiffy again)

 

I just sent off a sample request to LED Dynamics for about 8 (4 ea) of the White & Blue ELARAs (120 Deg View) and a BoostPUCK driver.. I'm curious to see if they'll send me some.

 

Now if I can only find one of those teeny tanks.

Link to comment
Share on other sites

sheesh, I should look on google before I post.

 

http://www.thatpetplace.com/Products/KW/F2...6/Itemdy00.aspx

39150[/snapback]

 

i have a 5-7g half octagon acrylic tank if you want it. $10 comes with a light or a frag will take it too. let me know

Link to comment
Share on other sites

Folks,

Buddy Scroggins, Supplier of the Chinese Bulbs was telling me they have designed a LED lighting system that will put out about 65w of light+.

Doing research on it now. You can contact him for more details.

 

FWIW, I've got a 10g system that works "ok", but mainly because I can do the DAILY upkeep to keep the system healthy. Amazing how much a gallon of water evaporation in a 10g system (10%) vs 100g system (1%) can change the complexity of your tank. Heat is the biggest problem in the summer especially. Doesn't make alot of sense to hook up a $600.00 Chiller to a 2.5g-10g system :blink: It is and will always be in constant need of attention. ALOT more than normal size tanks. I use a 5g tank as my QT tank beside my 75g as well.

 

Keep all of this in mind before you setup these small tanks and good luck. Cool too!

Howard

Link to comment
Share on other sites

Guest Keyoke
Folks,

Buddy Scroggins, Supplier of the Chinese Bulbs was telling me they have designed a LED lighting system that will put out about 65w of light+.

Doing research on it now. You can contact him for more details.

 

FWIW, I've got a 10g system that works "ok", but mainly because I can do the DAILY upkeep to keep the system healthy. Amazing how much a gallon of water evaporation in a 10g system (10%) vs 100g system (1%) can change the complexity of your tank. Heat is the biggest problem in the summer especially. Doesn't make alot of sense to hook up a $600.00 Chiller to a 2.5g-10g system  :blink: It is and will always be in constant need of attention. ALOT more than normal size tanks. I use a 5g tank as my QT tank beside my 75g as well.

 

Keep all of this in mind before you setup these small tanks and good luck. Cool too!

Howard

39449[/snapback]

 

Hmm good point Howard. Tho I'm curious - with the smaller surface area of a nano/micro tank, your evaporation rate would also decrease - hopefully signifacantly? Granted a lot would have to do with the environmental conditions - relative humidity, temprature, air flow, elevation

 

Also have you noticed that the tank is any more sensitve to poor water quality? I would think that even small quantities of Amonia or anything else considere 'unhealthy' would be more damming in a smaller tank?

Link to comment
Share on other sites

My 2.5 has been running since Jan '04 and I find it to be much easier to maintain than my 30 cube. Daily water top-offs are a must. I have 2x13 watts over it and it evaporates about 1/2 cup a day. Weekly 10% water changes keep the water quality high and I modded an AC 70 into a fuge that holds a few pieces of LR rubble and some chaeto. I've never had a nuisance algae or cyano issue in this tank. I have however, rescaped it twice now, most recently a few weeks ago because the tank was being overrun by vermetid snails, a hydroid issue and some clavularia and pachyclavularia that was growing like weeds. Went to a BB too.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...