FrontosaTony November 26, 2022 Share November 26, 2022 (edited) I just bought a used red sea 525xl and when I tried to hook back up the bulk head through the tank to the overflow was still leaking. I tightened it more and the thread underside mostly broke off. Anyone know how / if you can replace them? or other way to replace them! I got 100 gal of water, bunch of live rock and a 3 fish who can’t go in till it’s fixed help please tony Edited November 26, 2022 by FrontosaTony Link to comment Share on other sites More sharing options...
DaJMasta November 26, 2022 Share November 26, 2022 I would contact Red Sea, they do sell replacement parts for their stuff. If it looks like a standard part (like a standard bulkhead) you likely could get something branded differently, but IIRC, they use metric fittings, so it may be difficult to source the exact right size in the US. Link to comment Share on other sites More sharing options...
FrontosaTony November 27, 2022 Author Share November 27, 2022 Thanks! I ended up getting it tight enough so it’s a slow leak into the sump but couldn’t put the nut back on which worries me long term. Tank is filled and fish are At least happy, yay. At least it’s leaking into the sump. still will look if the part can be replaced or I can swap for a diff bulk head. Thanks for the help! Link to comment Share on other sites More sharing options...
BowieReefer84 November 27, 2022 Share November 27, 2022 Can you use silicone at the seal to get it leak free for now? You’ll obv have to get it dry and let it cure Link to comment Share on other sites More sharing options...
FrontosaTony November 28, 2022 Author Share November 28, 2022 Thanks! was thinking of siliconing it. I found they have replacement orings that look larger and less warn than what I have so I ordered them. Im going to swap them out and silicone the broken one. I think the nut that broke only keeps the through pipe from backing out and loosening the Oring seal. Thanks for all the help everyone! Wamas rocks Link to comment Share on other sites More sharing options...
DFR January 5, 2023 Share January 5, 2023 On 11/28/2022 at 2:47 PM, FrontosaTony said: Thanks! was thinking of siliconing it. I found they have replacement orings that look larger and less warn than what I have so I ordered them. Im going to swap them out and silicone the broken one. I think the nut that broke only keeps the through pipe from backing out and loosening the Oring seal. Thanks for all the help everyone! Wamas rocks Did you get this fixed? Swapping the o-ring seals will usually fix your original problem. As for the broken nut (if I understand the part correctly), you’ll have to buy the particular tailpipe assembly as the nut is not sold separately. It’ll probably be best to search Red Sea’s website (under support) for the exact part, then enter the part number on Amazon. The other option would be going through one of their dealers (could also be found on the website). Link to comment Share on other sites More sharing options...
FrontosaTony January 6, 2023 Author Share January 6, 2023 4 hours ago, DFR said: Did you get this fixed? Swapping the o-ring seals will usually fix your original problem. As for the broken nut (if I understand the part correctly), you’ll have to buy the particular tailpipe assembly as the nut is not sold separately. It’ll probably be best to search Red Sea’s website (under support) for the exact part, then enter the part number on Amazon. The other option would be going through one of their dealers (could also be found on the website). I bought some orings but it was not leaking much and I couldn’t get the pipe back out. I plan to do that another day. Looks to me as if the nut, actually the threads are the broken part, are part of the base plate and siliconed in so not sure there is a part or an easy to replace part. Once I replace the orings I plan to silicone the nut in place, which ought to hold it enough. Thanks for asking! Link to comment Share on other sites More sharing options...
DFR January 7, 2023 Share January 7, 2023 Yes, silicone is probably best as I don’t think they sell that plate. Good luck! Link to comment Share on other sites More sharing options...
AquaHaus January 21, 2023 Share January 21, 2023 If you need to cross that bridge, you can remove the whole triple “bulkhead” and replace with 3x 1” standard bulkheads. upside- you can use non proprietary junk gate valve for drain, customize with equipment as you like. downside, time and effort or $ to do it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now