Jump to content

DFR

BB Participant
 View Profile  See their activity

  • Posts

    685

  • Joined

  • Last visited

 Content Type 

Posts posted by DFR

    Anyone running a GHL WiFi mini controller?

    in General Discussion

    Two big gripes many have with the mini are the notifications and lack of data logging (charts).  To my understanding these will be remediated on an upcoming firmware update.  
    I must say though... the lack of notifications has been a welcoming fault.  With Apex, the sheer number of notifications I received daily kinda became background noise.

    How large of a tank can I place on the second floor of house?

    in General Discussion

    At 150-185g depending on height, I’d agree with @howaboutme that you’d be fine.  The closer you get to the outer wall, the more weight you’ll be able to support.  So a 185g tank a few inches from the wall wouldn’t be a problem.  If you follow the length of the metal beam, you will probably see vertical metal columns.  Those areas will also be capable of supporting higher weight loads.

    Kessil users: A360x lens on A80 light?

    in General Discussion

    Yes, it does look like the full angle adapter mounts using the screws at the back of the light. And I must agree, it doesn’t look like it could pivot 90 degrees so the light won’t be horizontal. :mellow:  Now I am seeing your dilemma.

     

    The narrow adapter does look to be the best bet providing the hole’s diameter is large enough.  If it is, you’ll only need to mount it about 9.5” to get the full 10x10” coverage so you should be able to use your current gooseneck.

     

    Well I was absolutely no help, hopefully someone with the adapter will be able to chime in.

    Kessil users: A360x lens on A80 light?

    in General Discussion

    Alan, what type of measurements were you interested in?  I don’t have the narrow adapter but I knowing that it has a 55 degree beam angle, I should be able to provide theoretical numbers if you’re looking for coverage/spill info.  What area the dimensions of the aquarium you are attempting to light?

     

    You will also have to get creative to mount the narrow adapter as I doubt the A80 has the necessary mounting magnets built in.

     

    Lastly, the A80 is able to utilize the Kessil mounting arm using the “full angle adapter”.  That’ll allow you to mount it closer to the water level.

     

     

    Aiptasia - argh

    in General Discussion

    The biological route is usually a gamble but if the peppermint shrimps survive, they’ll eventually help knock them back (and usually the most cost effective route).  If you’re going the chemical route I’ve had the best luck with Frank’s F-Aiptasia (this is the first thing I’ve used that didn’t cause them to spread when caught early).

    What is everyone doing to reduce nitrate's?

    in General Discussion

    On 12/28/2020 at 1:43 PM, sigel7 said:

    My system is a 120 about one yr old. I run a sump with a Nyos 120 skimmer and a uv light. I have several lps and just started adding a few sps all coral are doing fine. I have about 10 fish and feed small amounts 3 times a day. My parameter's are Alk 8 Cal 470 Nitrate 50 Mag. 1500 SG 1.026 I will have to test Phosphates. I use Brightwell neo marine salt and do 10 gallon water changes weekly. Would like to find some clean chato to put in my sump but Algae Barn is always out of stock. If anyone knows where I can find some please let me know. If I missed any info just let me know. Thanks

    A NYOS 120 may be a little small for your system.  If upgrading to the 160 is out of the question, the next thing would be adding some socks and and a carbon reactor (until you’re able to source some clean algae).  There’s also numerous members that’ll give you Chaeto for free, but with you being in PA I don’t know if you’ll want to make the drive.

    Lynn's Fish Room

    in Dedicated Tank (Build) Forum

    Hope all is well with you now.  The colors look extraordinary on those sticks.  Any pics of your new mushrooms?  I bought a Sunkist Bounce a few months ago and now it looks like I have been bitten by the bounce bug lol. After getting a PZ Godspawn and Frankenstein I told myself no more until Christmas.

    Filter Rollers

    in General Discussion

    A couple years ago, I actually stopped using filter socks all together (partially because I hated cleaning them).  About 6 months ago I finally cleaned my sump and installed a Klir drop-in fleece roller.  Despite a couple gripes with this system, I definitely love it and do not see myself ever using socks again.  If you are building a system, I’d suggest planning for one before actually setting up the tank.

    My first reef

    in New to the Hobby

    Video didn’t load for me.  I’d keep he gyre mounted on wall opposite overflow (or weir). If it is sucking air try dropping it a little lower in the tank.  I have mine mounted so that the top of the outside magnet is about 1.5” off the surface of the water.  If the bubbles were just trapped within the body of the gyre, it’ll work itself out.  Mine usually fully dissipate within a few minutes.

     

    By keeping it mounted horizontally, it’ll help with evaporation (to reduce heat in tank) as well as aid in Oxygen/Co2 transfer with the room.

×
×
  • Create New...