-
Posts
113 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Everything posted by Jerel
-
Exactly what i wanted and to support a local business I think i'm going with GHL again with lighting, but with four(4) Mitras Lightbar 2's controlled by my ProfiLux 3.1T. This'll be great place to house those impulse buys and a coral holding tank before they enter my display.
-
Shhh... I was told to go grocery shopping. But, of course i was on the hunt for a frag tank.
-
As this month is coming to a close.. I'm waiting for my father to allow me to use his fancy table saw to complete my acrylic sump. My little tabletop saw just isn't going to cut it, literally. I usually inquire to Avast Marine for Weld-on solvents and applicator bottles, pending order.
-
Ha! There's a bit of tech but it's quite simple.
-
Apex has an audible alarm or would you need something more frightening Lol Interesting.
-
Breakout box via a AquaController Apex? I was going to go that route with my GHL ProfiLux but i didn't have much use for the remaining inputs. However, adding two more sensors or door contact switches is possible as it recognizes the last switch command from different points.
-
Cabinet Lighting I've seen hobbyist use a particular type of motion sensor LEDs and they seem to be a bit cumbersome as the lights timeout after a period of time, not here. This kit allows me to have my light or lights on/off indefinitely. This modular system offers a endless amount of configurations Parts list: Hafele Surface Mounted Puck Light, 12v Coolwhite 5000k Hafele Modular Switch Lead Hafele Touch Free on/off Sensor Switch Hafele 20w 12v LED Driver .GIF(23.8MB) Better not have dial-up Lol
-
No worries - I'll catch you at FragFest ! I have an extra piece that you can try out if you like. Very nice ! Sounds like a worthy upgrade for your systems.
-
No Problem - Are you looking to start a fish room or add to a existing one? Great meeting you the other day !
-
Origami, Good question - This background is somewhat opague. Light does not transmit through the film unless you place a strong light source directly behind it.
-
I wasn't kidding when i mentioned "a new tank or two" from my first post. I'm starting to acquiring the equipment for my frag system I just need to make a decision on which tank to get... Roughly 40 gallons. Skimz will be my brand of choice for equipment. Skimz CM113 Calcium Reactor Skimz SM163 Skimmer
-
Applied a Blue Life Water Colors Aquarium Background , which didn't take too long(10mins) and a much better choice than painting the back of your aquarium, especially when you have a high quality tank.
-
You have a clean system yourself, scape looks familiar too!
-
Ha! Thanks !? You're running a calcium reactor and two different dosers ?
-
Welp, attended today's meet and i must say.. I was feeling a bit down because i couldn't bring home any of those photosynthetic gorgonians, acro's and stags from our sponsor Pacific East Aquaculture. This was quite difficult as i haven't been near corals in years.. I'm ready to dive straight in
-
Gotta love cable management .. I'm going to attempt to hide most of these cables within the BlueLounge Mini CableBox, along with a Apple Airport Express. The Doser and ProfiLux are held by blind shelf supports https://www.woodcraft.com/products/blind-shelf-supports-pair Did you notice the 1/2" hole located on the right of the shelf? Can you guess what i'm working on to control my cabinet lighting
-
In the process of setting up my ProfiLux 4 to monitor ambient temperature and humidity. This requires a PLM Humidity+Temp expansion card (PL-0278) and a Humidity+Temp sensor(PL-0279). The plan is to have my ProfiLux send me an email(capability- coming soon!) when my room temperature reaches a point to where it affects the water temperature. I can set my controller to react by turning on a cooling fan for evaporative cooling, supplementation to my programming for water temperature control.
-
Apogee Instruments has pushed out a few firmware updates regarding my SQ-520 quantum sensor these past couple of weeks, one of them being a fix for "Random but significant data spikes" and that did affect readings. The sensor appears to be more stable after the update.. So- Why not test my GHL Mitras pendant !? Quantum Sensor positioned eight inches below the light source Pendant configured to High-Output All nine color channels operating at 100% All nine LEDs are operating at 100% Readings Around 950, 8 inches Around 720, overflow weir Initial impressions.. It appears that the reflectors within the pendant do an amazing job at maintaining a balanced(quite natural) output of light, regardless of which kelvin temperature/illumination program you are trying to achieve. You'll also observe how the light is focused and not unstable by illuminating a whole room.
-
ProfiLux Online - I trust you're speaking of MyGHL Cloud? I'd say MyGHL is a work in progress that currently offers monitoring and basic functions, manipulate/override switch channel outlets, change assigned sensor settings, initiate maintenance modes, pump control (Except Vortech EcoSmart Modes. However, ProfiLux has custom profiles to create waves/surges/variable flow) GHL Control Center- Windows Operating system(No MacOS Support) is required to run this software. This is where you have full control of your system or systems. GHL Control Center *Only* QD VorTech pumps communicate via a Vortech Controller(11 pump configuration) and EcoSmart modes can be assigned throughout the day, including flow output... Vectra pumps are not supported - EcoTech would need to supply GHL with an updated firmware to add support. I doubt that will happen, even for Apex. ----------------- I'll have to test a few of my Tunze DC pumps to see how they operate under wave function.
-
You must have talked to Marco and Cristina at the GHL booth? I'm fairly involved with offering support regarding GHL equipment 'ProfiLuxOS' on Forums - Official GHL, ReefCentral and Reef2Reef. I really like the system but there is no coding involved. It's quite simple as selecting your programming via a drop-down dialog box and inputting numeric values. Is there something specific that you'd like to know? I plan to create a lot of content regarding setups and programming on this thread. My ProfiLux 3.1t and Doser 2 has been online for about three years on a dummy system(Test Bench). Ha- I like technology too? Don't get me started..
-
Much appreciated ! I'll see if I can make a time lapse of the Barrel Tender functioning within a couple weeks. The install and programming will be done tonight.
-
Origami, I appreciate your manner of hospitality. You'll find that I'm quite generous when it comes to providing content
-
Why, thank you !?
-
Today, working in the gunk section of my basement - You know.. The area where you have Christmas ornaments and stuff that has accumulated over the years. I think it's time to move the stuff on out and position my aquarium equipment(The Lab). Relocated my eleven year old SpectraPure RO/DI unit Installed the new Avast Marine Barrel Tender V2, which needs to be wired to my ProfiLux 3.1T Controller via a DB9 'Female' Terminal Block and PLM-ADIN Expansion Card. I'm curious to see the amount of control i have with this unit.
-
This will be quite the showpiece, and indeed.