Recirculating Skimmer Question

[six-line]

Hi All,
I am looking to get your opinion on what you think I should do to my skimmer as far as moding it to be recirculating. The skimmer is ASM G-6 the chamber is 36” tall then the cone and collection cup makes it approximately 48” tall. http://www.aquacave.com/ASM-G-6-Prot...mer-P1248.aspx

Pumps:
3 PSK 2500 http://www.marinedepot.com/Sicce_PSK...FIWPSB-vi.html
1 Bubble Blaster HY-3000S http://premiumaquatics.com/aquatic-s...-HY-3000S.html

I have it set up now with two PSK 2500 and the Bubble Blaster HY-3000S not recirculating and it does a great job but I think I can squeeze a little more oomph out of it.

Option 1:
Three PSK 2500 moded to recirculate and fed by my return pump.

Option 2:
Two PSK 2500 recirculating and using the bubble baster to feed it.

Option 3:
Three PSK 2500 moded to recirculate and fed by the bubble baster. I’m a little worried that the bubble blaster will not be able to handle the head pressure of the 36” water column of the skimmer.

Option 4:
All out- all four pumps recirculating and feeding the skimmer off my return pump.

So what do you guy’s think would be the best option for a roughly 300 gallon SPS system. Thanks.

[YHSublime]

Option 2, and change the pumps to PSK-1000's. So 2:B

 

How big is the tank?

[six-line]

Thanks Sublime for your input but I'm trying not to put any more money into this build if I can help it, maybe later on. The tank is a 225 gallon with a 125 gallon sump. So you think the bubble blaster can handle the head pressure?  

[YHSublime]

Thanks Sublime for your input but I'm trying not to put any more money into this build if I can help it, maybe later on. The tank is a 225 gallon with a 125 gallon sump. So you think the bubble blaster can handle the head pressure?  

 

I think so, you shouldn't need that much. Check out the Avast CS models for ideas. Zygote has actually suggested a lesser powered return pump on my CS3 for more control, and I just use an MJ 1200.

[DCReefer1964]

I think so, you shouldn't need that much. Check out the Avast CS models for ideas. Zygote has actually suggested a lesser powered return pump on my CS3 for more control, and I just use an MJ 1200.

Using the MJ1200 is the solution. Look for an older model and get a new impeller. I do not care for the Colbalt pumps