dgtlwar September 11, 2009 Share September 11, 2009 I posted this on RC earlier, but it may be useful to someone here. If you have any fitment issues with the Aquasurf cables it's not too difficult to make your own. HOSA MIDI cable. Pins 1-5 starting on the left Strip the outer shielding, on this particular cable, ping 3 is the ground, you only need about half of the copper. On the AquaSurf cable only pins 2, 3, and 5 are used. So I cut the other cables down at the insulation. You need to be very careful not to short out and pins because #3 isn't shielded. Pinout RJ45 connector with clip facing down: 1 2 3 4 5 6 7 8 5 3 x 2 5 3 x 2 Works like a champ now and actually fits without any tape or rubberbands. Link to comment Share on other sites More sharing options...
johnnybv September 11, 2009 Share September 11, 2009 Nice work Glenn, you can now be my APEX support guy! john Link to comment Share on other sites More sharing options...
Origami September 11, 2009 Share September 11, 2009 That's a great DIY post, Glenn! Thanks for posting it here. Link to comment Share on other sites More sharing options...
dgtlwar September 11, 2009 Author Share September 11, 2009 That's a great DIY post, Glenn! Thanks for posting it here. No problem. The origina. Cables were too short and flimsy for my liking. John I still need to learn how to use the Apex myself Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now