Grav April 12, 2008 Share April 12, 2008 (edited) Just delivered a new Perfecto 265g tank and stand to a customer that is upgrading durring a move (as good an excuse as any.) Tank is 7ft long, 24 front to back and 29 tall. Corner over flows, old school from the AGA / Oceanic perspective, but I like it, adds to the aquascaping options, more open space in the middle and you really don't use that side glass anyway. Will have to find a way to block out that ugly window into the overflow. The stand has 3 doors, and 2 upright braces... so there is not one big openeing to slide a sump into. However they are screwed in with wood screws not glued and brad nailed so easy to remove and replace. Whole stand front has an "S Curve" wave to it... very cool IMHO, just changes up the flat look. Floor of the stand is just the width of the plywood, not raised up at all, so give a bit more room under the stand. All and all, very cool. Will take some pics and post once it is cleaned up and on the stand. Edited April 12, 2008 by Grav Link to comment Share on other sites More sharing options...
tygger April 12, 2008 Share April 12, 2008 Sounds nice... tagging for pics. Link to comment Share on other sites More sharing options...
Guest MikeInFredVA April 12, 2008 Share April 12, 2008 Sounds nice... tagging for pics. blow a pic of the front of the tank up to 29in and tape a piece on the out side or the overflow areas on the side. then no one will ever see the over flow area. lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now