Hugh Gannon June 13, 2024 June 13, 2024 (edited) I got this AI Prime a few weeks ago and was just running it on a preset. I was informed that it was much too strong for my little 12 gallon nano. I have attached my adjusted schedule below and was wondering if I need to make any more adjustments. I have mostly softies with a few LPS. RPReplay_Final1718235428.mov Edited June 13, 2024 by Hugh Gannon
epleeds June 13, 2024 June 13, 2024 I love running my lights on all blue. So if you change the percentage to say 75% all blue then add a few percentage for white till it’s to your liking.
DaJMasta June 14, 2024 June 14, 2024 This is my schedule for a pair of Prime HD 16s over a standard 10g. Some montiporta, favites, micromussa, zoas, gorgs, and a rock flower anemone. My guess is your schedule is a bit low, but it may do the job for the lower light corals you're describing.
Hugh Gannon June 14, 2024 Author June 14, 2024 16 minutes ago, DaJMasta said: This is my schedule for a pair of Prime HD 16s over a standard 10g. Some montiporta, favites, micromussa, zoas, gorgs, and a rock flower anemone. My guess is your schedule is a bit low, but it may do the job for the lower light corals you're describing. Thank you for sharing. I am still new to AI systems but is it possible for you to send me your schedule so I can download it?
DaJMasta June 14, 2024 June 14, 2024 Honestly, I don't know if you can. My schedule is nothing schedule, I tried to pick colors that looked good - whiter in the day, bluer at night - a photoperiod close to when I'd be looking at it, and then tried to adjust it to a level that seemed to be keeping the corals happy. My lights are mounted about 13" off the water, and having two is because I can run them lower (less fan noise), I get better coverage on the long rectangle footprint, and because I had one start to fail, ordered a replacement, and then found out it was just the power supply failing. The image gives you a rough idea - roughly 10 hours at high brightness, maximum of a little less than 100% on any channel and around 38W as the top total power level. This is meant for corals with brighter requirements than what you're describing, but really for high light corals.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now