[Best red slime remover on reef tanks]

Thanks Tom,

im going to go this route based on what you say and my preliminary thoughts of trying just that.   The system is 1500 gallons (reef) so there is a lot to lose if a mistake is made.  Appreciate it Tom!

 

btw: thank you everyone who replied with their experiences and suggestions on a method of getting this done.  Very much appreciated.  

[Best red slime remover on reef tanks]

Your experience is what I had but lost more fish and rose anenomes.    I’m thinking of doing a lower dose and leaving skimmer on but very low. 

[Best red slime remover on reef tanks]

On 2/1/2019 at 7:38 PM, ReefdUp said:

Recommend finding the root cause and reducing it that way.

Sent from my SM-G935P using Tapatalk
 

Oh that’s helpful

[Best red slime remover on reef tanks]

I’ve had bad luck using red slime removers in reef tanks where I have killed anenomes and some fish despite using the product as directed.  I’ve heard Anti-red is better to use and apparently there is one made by Sera and one made by Aqua Medic.  It was also told to me that these products claim to leave skimmer on while in use.   Anybody with any experience with these products on a heavily stocked reef tsnk?

[New sump]

Take a look at our website

[550 Gallon 120x36x30 In-Wall w/ Side Views + Fish Room]

Nice size tank!

[Steel Stand]

We build steel stands. Email us for a quote

[300g SPS and Gigantea Anemone Tank]

Beautiful ! Is that the same tank we made for you 8 yrs ago?

[Sump, topoff, frag tank special. 1/2 price]

Lots of cutoffs have built up.

Sumps

Limit in length 36"

Limit in height 16"

Limit in width 16"

 

Frag tank

 

Length limit 36"

Width limit 20"

Height limit 10"

 

Topoff tank limits will be 15 gallons

There will be a limited amount of these tanks that I will be able to do so act fast. These will be a fast turnaround of less than a week. Need this material used up and out of here.

[Who is good with Apex connection setup to Internet?]

Btw this would be in Virginia Falls church area

[Who is good with Apex connection setup to Internet?]

I need some help with setting up an apex connecting to Internet. Pm me if you can help. Willing to bartar for this service

[MACNA 2013, Who's going?]

Yup

[Prepare to be amazed......]

I'm impressed but, prices are not listed. What is the pricing for these?

[I need some help lifting a tank - Annapolis area]

John I will try to be available. That is a good time for me so I'd say 75% sure I can

[RLSS Waveline DC Series Pre-order]

We are past the second week of June. When are they going to be in?

[300 dd tank cracked by moving company during move....]

Just as there are specialty movers for pianos there are movers who just move aquariums. One just has to do a little extra search. The little bits of knowledge ( like stand the tank up on end with a moving blanket) help keep a nightmare from happening. BTW I am a USAA member also and that has its big perks as you've probably known.

 

If you would like me to take a look at the damage I may be able to help you out getting it fixed. Give me a call.

[SHOUT OUT FOR QUANTUM]

Yes, these guys are very helpful. Will be a big help/asset to the club

[Anybody available in Baltimore on Saturday morning to lift a 730 gallon tank up onto a truck?]

Given that the bottom has cracked before, you may want to consider a 1" bottom. A tank with those dimensions I would not use a 3/4" piece. It's going to be expensive but you'll not have the same problem again.

[Anybody available in Baltimore on Saturday morning to lift a 730 gallon tank up onto a truck?]

Is that the 11ft long tank?

[Website updated with new look]

New things added to website. These pics will be added to page tomorrow. They are some new sumps we have been working on. LED lights inside sump. Blue PVC pipe (which we will be selling). Along with the LED lights these sumps will feature polycarbonate lids. The sump features a plate that slides to allow to adjust for water levelsThere will be a 2ft, 3ft.,and 4ft, size.

 

[Lots of used tanks and sumps]

Several sumps and tanks (used) for sale:

 

First is a sump built by grey seas 48x24x18" with filter sock holders $140

 

Next is a 36x15x18 sump $75

 

Tanks

 

60x30x24" 200 gallon acrylic aquarium all 3/4" thick with two end overflows made by clarity plus. Can be sold as is with scratches $380 or with a buffed out front panel $650

 

Next tank is a acrylic clarity plus tank 84"x23"x30" 240 gallon. One end overflow. Scratches yes. This tank I am not offering any buff work and will be sold with its current condition which is one with many scratches. $200

 

Pick up is near Annapolis Maryland. Delivery is an option at $90 to the driveway. I have lots of used equipment as well for just about any size aquarium. Skimmers and pumps I have tons of. I have two Giesemann 6ft halide fixtures as well.

 

EMAIL ME @ jeffhaddock@comcast.net for any questions.

[Glass scratches]

Yes, but its very expensive and time consuming. If scratches can catch a fingernail it's likely not going to happen. If also the quantity of scratches is high you also will find its not practical to do it.

[Large new sump build]

Check out this video. Would love to hear your thoughts. Pm me for any comments

 

<a href="http://smg.photobucket.com/albums/v202/falls1723/?action=view&current=B48C3913-A4AC-460E-81A5-9D0ABBFCF72E-13439-000008D5B0C2D022.mp4" target="_blank"><img src="http://img.photobucket.com/albums/v202/falls1723/B48C3913-A4AC-460E-81A5-9D0ABBFCF72E-13439-000008D5B0C2D022.mp4" border="0" alt="Photobucket Pictures, Images and Photos" /></a>

 

http://smg.photobucket.com/albums/v202/falls1723/?action=view&current=B48C3913-A4AC-460E-81A5-9D0ABBFCF72E-13439-000008D5B0C2D022.mp4

 

[6ft Giesemann Spectra & Giesemann Infinity 3x250 watt w/4 x80 T-5's]

I have 3 72" inch metal halide Giesmann fixtures. Both are in excellent condition both are silver in color. One is three 250 W halides using double ended bulbs. The other uses mogul base bulbs. The Spectra fixture has brand-new bulbs in it.

 

Spectra $1000

Infinity $800

 

[removing scratches from glass]

I've done it many times for clients. Even with the right equipment a three inch scratch can take 2 hrs. If you can get a finger nail in the scratch, triple that. Then there is the distortion factor. Not worth doing I. Most cases.