dcullen

If you get ambitious later, Steve's Leds has great LED conversions for biocubes.

I have the same setup but added 7 more leds and driver for 3 channels total. DId you get the extension cable? You want to use the top 4 pairs of PWM outputs. Negative is on top. Positive are underneath. (the 4 pairs of 10v outputs are not used) I used a piece of CAT5 network cable to connect from the typhon to the drivers. Connect the 5v PWM output on the Typhon to the dimmer connections on the drivers. If you're using the dimmers, pull the jumpers on the drivers and connect the dimmers to the same connections. Did you download this http://www.stevesleds.com/uploads/Typhon_LED_Controller_2915.pdf Figure 7 or 8 should work depending on what driver you have. Recent order, most likely Fig 8

Looking for BLACK starboard for bottom of RSM 130 (20" x 24") Are there any local suppliers Thanks Doug

Well, it was most likely sold as a "wet-dry" filter and that is indeed a skimmer. Right compartment would have been filled with "bio-balls" and topped with a drip plate. IRC the Skimmer was "air powered" utilizing a lime wood air stone to foam the column. If it holds water and fits your space, you should be able to reconfigure it for your system, perhaps relocating dividers via "dremelling" Actually if it leaks, there is glue. Good Find