-
Posts
2,112 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Posts posted by jnguyen4007
-
-
I paid for my membership at the summer frag fest and have yet to recieve my card. If there is any info you need from me please let me know. Thanks
-Anthony
Hi Anthony,
PM me with your information:
Full name
address
wamas screen name
phone number
email address
Also mention that you paid at the summer frag fest.
I will make sure to have your information updated if it hasn't already and get your membership card out. If I hear back from you today, I can get your membership card out to you tomorrow. Thanks.
-
I've done this a couple of times. Not sure what is happening.
The last times were once in August 29 and August 30 to davelin315 and jnguyen40007 respectively.
I be on the look out.
What happen was that I sent a reply back to you at the end of Aug asking for a confirmation of your address and for you to let me know if you would be at the meeting or not so that I could either give it to you personally or mail it to you. I did not hear a reply back from you until now. Now that I got your PM confirmation, I can update your information, your membership card will go in the mail tomorrow.
-
I'm still hanging in here waiting...........
PM me or davelin315 with your information.
-
Membership cards have been placed in the mailbox to go out on on 9/15/09 for the following:
Neilan
Magnetic1
TBM
Ebman74
-
PM Sent. Need card.
Greg,
Your membership card will go out in the mail tomorrow. Thanks for letting me know.
-
PM Sent. Need card.
William,
Your membership card will go out in the mail tomorrow. Thanks for letting me know.
-
PM sent and still waiting to be given access to Member Section after renewal.
Eric,
Your membership status have been updated. see PM.
-
I could change the title, but you may want to start a new thread under propagation and breeding.
trade you baby horses for baby clowns.
Doug,
Another option is change the title and delete any part of the thread that does not fall under propagation and breeding.
James
-
processed, need cards:
Kevin Garrison
aheto
randumbwit
adamsfour
The above membership cards have been put in the mail and will go out tomorrow.
-
I have used IO for ten years with no problems, before that it was Coralife, again never any issues. I just recently switched to Crystal Sea Bioassay. I have had a few things RTN/STN in my display and frag tank since switching. Normally within days of a water change.
What's RTN/STN?
-
doesn't Aquarium One still sell 200 gal box of IO salt to WAMAS members for $35.00 a box? That's a great price!
-
Salt is one of those things I think everyone has an opinion on.
I gave up caring, and use IO since it is available everywhere, is decently priced, and I will have to dose regardless of what salt I use.
+1 on Instant Ocean salt.
-
It also looks like you have a regular HOB filter. That filter is fine for fresh water, but I don't think it does anything for a reef tank. It's fine if you're doing fish only, but you really should consider a skimmer if you want to keep any kind of corals.
-
processed, need cards:
Kevin Garrison
aheto
randumbwit
adamsfour
I'll work on these tonight or tomorrow.
James
-
Chris,
A sump does not have to be fancy or expensive. A lot of ppl buy a used fish tank and convert it to a dedicated sump. Look around on WAMAS and craigslist for a used tank that fits your space and budget and go from there.
-
Great advice from everyone.
-
That last picture looks like the whole thing is dead.
-
I can get Current, Coralife, UV brand T5's and Coralvue, Reeflux MH. Most t5's run $15-$17, halides run $30-$50
Can you see how much is the Reeflux 12K bulb? Thanks.
James
-
processed, need cards:
dmatt56
modelrr (student)
smoothriqueter
Membership card for the above has been put in the mail. Can expect to receive by end of the week or early next week.
-
Thanks.
-
Guys,
check this site out. They sell DIY sets which require minimal work (no resistors) since they are paired in perfect numbers to existing power supplies (12 per). They include focusing lenses with your choice of 40, 60, or 80 degree spread output. These are 3 watt Cree X-Lamps.
I wanted to purchase the 24 DIY kit except with all blues (prefect blue wavelength 450-460), but I'm still looking for a suitable heatsink or related mounting material. The latest quote I got for some heatsinks for this application was quite expensive. $115 for some custom cut 49" x 1" strips. If anyone is interested and wants to share the cost of the heatsinks with me, or if you know of a cheaper place for heatsinks or similar let me know!
What's the site?
-
Can you provide the link to the N-R forum? Thanks.
-
sent PM for renewal card. Still have not received.
Fred Gregory
Fred,
See the PM I sent you on Aug 29, 2009.
James
-
My program was fine. The display would show that it was off but the relay never opened.
I called Neptune and outlets #4 and #8 are different then the others. Those two are prone to the contacts welding together with high inrush current devices such as large pumps and ballasts. Any loads like that should be plugged into #'s 1-3 and 5-7. I gave the DC8 two hard hits and the relay opened back up.
That is good to know.
Who still waiting for their WAMAS membership card?, Send me a PM with the following information...
in General Discussion
Membership card for Mountaineer is in the outgoing mail to go out tomorrow 9/17/09.