Jump to content

My 180 build


Recommended Posts

I currently have a 55 gallon mixed reef and now its time to upgrade I decided to go with a 180 and use my 55 as a BTA tank.  To make my life easier I wanted to plumb the tanks together so I would just have 1 large system.  My 180 I got used from Pizzaguy and it came with a tigger systems 36 sump but I wanted to add a separate large refugium to handle whatever bioload I can through at it.  So i got a 44g tank for the fuge and used the wet dry sump that came with the 44g as my Ato reservoir which I installed a float switch and programmed the Apex to shut off the ato and text me when its empty .  I also installed a 40 breeder for use as a frag tank later down the road.   I bought the rock used so I let it cure for around 3 months running GFO and doing water changes to pull out the phosphate from the rock.   I also dossed live rock enhance and Microbactor7 to the rocks to help build the bacteria.  I used Marco mortar to create the auqscape and prevent any moving of the rocks by inverts and fish (lesson learned).  I made sure all my parameters where as close as possible I had to dose NO3 into the 180 to get it close P04 was close enough.  And when I joined the 2 systems My corals in the 55 never skipped a beat.  I am running 2 return pumps one pump runs the 55 and the frag tank, the second vectra M1 runs the 180 and I have it plumed for the future addition of another tank into the system.  If I would have known how powerful the vectra pump was it could have easily powered the entire system.  Total system volume should be right around 300 gallons taking into account for the rock and sand.

IMG_20200610_172826633.jpg

IMG_20200418_194459119.jpg

IMG_20200531_202558176.jpg

IMG_20200604_124426584_HDR.jpg

IMG_20200611_143219560.jpg

IMG_20200608_202932465.jpg

IMG_20200613_145204748.jpg

IMG_20200613_203625070.jpg

IMG_20200615_125913741.jpg

IMG_20200714_223843977.jpg

IMG_20200714_223916544.jpg

IMG_20200707_201439998.jpg

IMG_20200718_180316524.jpg

Link to comment
Share on other sites

(edited)

 

14 minutes ago, dmatt56 said:

Looking good! I like how you’re matching the cabinets to tie everything together.

Thanks they are old kitchen cabinets from a remodel that I grabbed before they got trashed.  I removed the handles and gave them a nice coat of paint and they match the ones on my 55.  

Edited by Vacobra1
Link to comment
Share on other sites

Since it looks like you’ll have 3-5 tanks on top, do you have an almost empty tank on the bottom to accommodate the water that’ll drain when the return pump is off?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...