harticus5 January 7, 2016 Share January 7, 2016 Having a hard time locating any information on this..... I have a 180 gallon with GyreXF150 and MP40QD, and a 65gallon with 1- WP10. The MP40QD has a the Ecotech battery backup. The XF-150 and WP10 is connected to to Icecap battery backup. During a test power outage.....flow on MP40QD and WP10 is good/instant.....however the XF-150 there is about a 2-30 second start up delay and flow is extremely week flow. I recall reading the pump goes to "minimal flow" or "10% flow/30% flow to conserve battery" for the xf-150 any one have any experience with this? I suppose there is not much I can do, other then give the powerhead a good cleaning and see if there is any improvement. Link to comment Share on other sites More sharing options...
AlanM January 7, 2016 Share January 7, 2016 I'd email support at CoralVue and let Carlos answer about the Gyre pump. I do recall that in a power outage they slow it down on purpose to conserve battery, but don't remember the details. Link to comment Share on other sites More sharing options...
harticus5 January 7, 2016 Author Share January 7, 2016 Will do. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now