Crob5965 January 25, 2015 Author Share January 25, 2015 In the plumbing section near the flex hose you should be able to find a 3/4 T and just add that into the line I'll take another look today and see if I cant rig something together, I still prefer this Idea over running another pump, if all else fails I will have the DC1200 tomorrow afternoon. Thanks for the help Link to comment Share on other sites More sharing options...
Crob5965 January 25, 2015 Author Share January 25, 2015 ok so I just got back from HD, I got all my plumbing supplies, I have 1 quick question, about the glue, I remember reading a while back that you had to leave the glue set for a few days because it can mess with the water quality, I bought as many threaded pieces as I could, but there will still be 1 or 2 pieces that I should probably glue. Any thoughts on this? I could hook everything up and disconnect my sump for a day or 2 if needed Link to comment Share on other sites More sharing options...
John Ford January 25, 2015 Share January 25, 2015 pvc glue dries fast. Its silicone you have to let dry for a couple days Link to comment Share on other sites More sharing options...
Crob5965 January 25, 2015 Author Share January 25, 2015 pvc glue dries fast. Its silicone you have to let dry for a couple days great, I'll get started now them : ) Link to comment Share on other sites More sharing options...
Crob5965 January 26, 2015 Author Share January 26, 2015 OK, so I got everything plumbed up while I was doing a water change, worked out quite nicely, I switched out my 5Gal HD bucket with a 10 gal trash can for my ATO reservoir too, so now I have literally taken up every square inch under my tank. pictures to follow. Thank you everyone for all the advice and recommendations, I am very happy with the results. and Thank you to the Guy at HD for telling me that the Flex hose I have been using for the last 2 years will give my fish ich and kill all my Coral, I will hang on to that great piece of advice, along with eating cheese before bed gives you nightmares Link to comment Share on other sites More sharing options...
Crob5965 January 26, 2015 Author Share January 26, 2015 Link to comment Share on other sites More sharing options...
Crob5965 January 27, 2015 Author Share January 27, 2015 Quick update after 2 days of running, everything is working great, I went ahead and added a ball valve to the return even though the DC pump has an adjustable flow rate, it made dialing it in perfect, the noise is minimal, overall I am very happy with the project. Thanks again to Isaac, John and Goskn5 and Wangspeed for all the input. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now