sydney December 23, 2015 Share December 23, 2015 My mp40s are flashing red and green and are not pumping. I tried to hard reset them. Nothing happens. Has anyone had this happen to them before Link to comment Share on other sites More sharing options...
gmerek2 December 23, 2015 Share December 23, 2015 (edited) http://ecotechmarine.com/media-gallery/video/ecotech-how-to-blinking-red-stall-error-reset Try this. If it doesn't work make sure you take the dry side and wet side off glass. You are in stall mode. Figure out why you are in stall mode before restarting. Probably don't have the spacers in right for glass thickness Edited December 23, 2015 by gmerek2 Link to comment Share on other sites More sharing options...
sydney December 23, 2015 Author Share December 23, 2015 Well i didnt take them off the tank Link to comment Share on other sites More sharing options...
PupChow December 23, 2015 Share December 23, 2015 I had the red/green flashing error as well, it means the prop cannot spin smoothly for whatever reason. In my case, the prop would spin a few rotations slowly and stop. It turns out that my wet side was the issue, the back cover easily opened on mine and there was shaving on the magnet and a groove was developing, after I removed the shaving it worked again... for a month before it stopped for good. I decided to switch to the Gyre, but if I wanted to keep the MP40 I'd probably just buy a new wet side. Link to comment Share on other sites More sharing options...
sydney December 23, 2015 Author Share December 23, 2015 I just purchased a wet side. I will try it later Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now