Another Ca Reactor setup question

[rtsusc83]

I will be controlling a Ca Reactor using a pH probe connected to the Apex controller.  Will calibrating the pH probe using 7.0 and 10.0 solutions be sufficient for the range that the pH will be used?

[ridetheducati]

7 and 10 will work, but better is 4 and 7.  The reactor will most likely be working in the areas of 6.0 - 7.0.

Edited October 4, 2013 by ridetheducati

[rtsusc83]

Thanks, I figured out how to use Apex to change the settings for 4.0 and 7.0