ctreptow
-
Posts
518 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Posts posted by ctreptow
-
-
Are you by any chance plugging 96w lamps into a 65w ballast? I would look for a new ballast...
Chris
-
Do you have anything else plugged into this circuit, heaters, pumps.... There may be aproblem with the PC or halides. They don't draw anywhere near 15 amps. You may have a problem with the new PC's.
Chris
-
The circuit could run more then just your room. I have circuits that include all the plugs in up to 3 rooms. You shouldn't have a problem with running the lights off the circuit alone. I have 4 175w MH with 440W VHO running off the same 15amp circuit. I would try to turn your lights on in a different order and see it it is always the same light tripping the breaker. Also look for other loads on that circuit. It may not be in your room.
Chris
-
Hey Sgt
I have a small 2" yellow tort frag, to trade for a frag of your blue tort frag.
Chris
-
I have
to give
Acro Tri color (Tang Away- Sam)
Yellow Miyagi Tort 1 branch 2 inches. (Lee)
Yellow Dig (Holly)
Green Dig
Hey Doug
I would love that green cap and torch
Chris
-
I was thinking of removing the DSB, but I really don't want bb and I'm not sure how crushed coral would look.
Chris
-
The RO system is less then 6 months old and I need to get a TDS meter to see it it's working. I was thinking of making a DIY DI canister for it so I can add DI.
Chris
-
Hey Howard
Yep that slime algea can be a pain. and I was suprised at the results from adding the new probe. I just can't figure out what the corals are not extending the polyps.. I have 2 acro's that I have never seen the polyps extended.. The color seems good but they are closed up tight..
Chris
-
Sunday isn't good for me [tr].
LMK know what I have to do and who needs money for the parts.
Thanks Chris
-
David
They are awesome great find..
Chris
-
And the mystery continues..
I added Purigen and replaced my carbon. The PO4 dropped in half and still no detectable nitrates. The one good part is that I replaced my grounding probe and the monti in that tank extended it's polyps almost immediatly. I added a grouinding probe to tank 2 but the corals are still closed up. The other tank is till having issues. I tested Magnesium today and it's at about 1395 so no problems there...
Still looking..
I am going to start playing with flow and lights. My 75's each have 2 175w MH with 220W VHO actininc mounted about 12 inches over the water. My SPS 75 have about 1700Gph flow in it, I am going to move the PH arouind and see if the flow is bothering them.
Chris
-
No they don't sweep. My Seio seized up after 2 months but Seio replaced the impeller for me and it seems to be working fine now.
I like the flat water movement and will be adding 2 more 1100's when I can find them.
Chris
-
Ok Guys while waiting on the parts list lets talk media. I talked to Chip today and it looks like larger sized media may be better for this reactor. I searched RC and came up with 3 types of media.
Arm of course gets the best vote.
Geo Marine from Caribsea this is crushed coral substrate.
schuran media large granules
The best price for the ARM media was from Aquarium supply. They are posting $60 for a 50lb bag shipping. I sent them an email requesting a bulk discount and shipping prices.
Geo Marine Media is $18 for a 40lb bag.
-
Well I must revise... Next week is no good for me I have to go to NJ... It's not going to be as fun as golf in LV...
Chris
-
Thanks Chip
I thought it was to thin oh well... It looks cool tho.. Are you going to be around today. I can come over and take pics. I want to look over that skimmer too.
Chris
-
I bent up some acrylic over the weekend. Will 1/8" acrylic be ok for this project. I bent the acrylic in a U shape with 3 8" sides and 18" tall. If the 1/8 is ok for this I can bend it up for the project then we only have to glue the back, top, and bottom.
Chris
-
Chip Great job it looks good.
Chris
-
Next week is fine too.. Oh Doug I feel so sorry for you :D. I can pickup the irons from you Doug if needed.
Chris
-
Hi
Yeah I didn't realize how the sand bed would react to a move. I should have thrown it out and started a new one. Alk is measured in Meq/l so alk is 2.5 Meq/l or 7 Dkh. I have added Reef Builder to try to bring the Alk up.
Thanks Chris
-
Hi Lee
I have run carbon in the past and I will look into purigen. I ran
Rowaphos through a small canister filter but it didn't seem to help. I have 210 gallons total how much carbon should I run at a time?
Thanks Chris
-
Hi Guys
Over the summer I upgraded my 30 gallon to 2 75 gallon tanks sharing the same sump. The 1st 75 was new and I moved all the stuff from my 30 into it. I had a 3 year old DSB (40 Lbs) and 50 lbs of live rock a couple of softies and 2 percs. To this I added another 80lbs of Southdown and 50 lbs of live rock from another established tank. The 2nd 75 was purchased from another member. It had a DSB don't know the age and 200 lbs of live rock. During the move The DSB was removed and put back after the tank move.
I have a 20 gallon fuge with Cheato
Kalk Reactor
Aqua C 180 skimmer
I have some montipora Dig and Cap a couple of Bali acro's.
Tank Params
Salinity 1.026
PH 8.0 day 7.8 night
Ammonia 0
Nitrite 0
Phos .1
Nitrate 0
Alk 2.5 it's hard to keep up
Calcium 500
Ok so here it is, I am having an algea problem. Green hair algea is growing on the glass in the back and on the sides. My coral has some polyp extension at night but none during the day. Coral is growing but since the polyps don't come out during the day I don't know if I am setting up for a crash.
I have tried to reduce Phos without success, and I harvest cheato at least once a week to keep it thinned out.
Any ideas, Is this a result of DSB move?
Thanks Chris
-
Hi All
For those who have a reactor does the media dissolve or do you have to take it out and replace it?
Chris
-
Great Thanks I do have 2 float switches if we are short there.
Thanks Chris
-
Ok I've been following this thread and since my feeding pumps can't seem to keep up with evaporation if there is still room in this group I would like to join.
Chris
Electrical Problem
in General Discussion
My other thought is if this is a DIY job you may have the endcap wired wrong. If the endcap is wired wrong you will short the ballast which will blow a breaker.
Chris