Jump to content

Djplus1

BB Participant
 View Profile  See their activity

  • Posts

    1,836

  • Joined

  • Last visited

 Content Type 

Posts posted by Djplus1

    Crazy idea

    in General Discussion

    As long as the temps are adjustable and you don't have weird stuff in the lines that can't be cleaned out I think it would "work" The main issue is if it's suitable for marine conditions I would assume.

    test kit question

    in General Discussion

    I would skip the test kit and add an ammonia badge during cycling. 

     

    Much, much easier than a test kit, so you're more likely to actually do it.

    Wow, you're really talking to my lazy side, lol. I've actually never used one. Is it really safe to assume that once ammonia is at proper levels I can just add some fish without nitrite/trate tests? I will be in Rockville today, is this something that Congressional or Petco will have on the shelf?

    test kit question

    in General Discussion

    So this is going to come off as a total newb question, but since the move a couple years ago I've had most of my test kits in the garage. I realize most (if not all) need to be trashed, but do you guys think that I can get away with using the API test kit that I brought inside with the tank to test the cycle of the old trusty Red Sea Max. Obviously will get the fancier stuff when I have it up and running, but I never tested trates, trites, ammonia, PH etc once the tank was up and running.

     

    Water has been in for a few days now and I'm dosing AquaVitro seed to kickstart the cycle.

    BRS pressure gauge broke?

    in General Discussion

    OK, I'm almost back in. I just got my RODI set up. it's the https://www.bulkreefsupply.com/4-stage-75gpd-plus-ro-di-system-bulk-reef-supply.htmlwith the 150gpd water saver kit installed on top. I assume that the pressure may be a hair low so I am connecting up my booster pump, but the gauge doesn't seem to pick up anything. It is one of these https://www.bulkreefsupply.com/air-filled-pressure-gauge-1-100-psi.html 

     

    I haven't used this RODI in a couple years so is it likely that the gauge is "gummed up" and can be used again or do I need to get a new one? And does anybody have experience just picking up the gauge itself from Home Depot and attaching it to the fitting?

    125 vs 180?

    in General Discussion

    the RB fixtures are just relabeled/rebranded evergrow fixtures with their RC mark up for the sticker or engraved logo on top, etc. the layout is stock to all evergrow fixtures. we've worked on that layout with evergrow over about three or so years. now it's the standard and works very well without fuss over custom layouts. you can still buy extra LEDs if for some reason you just have to augment the layout. the latest it2060 (24" evergrow) now comes with legs and nicer profile and yes i'd be glad to help. shoot me a PM if you have any questions/when ready to order. I place orders about once a month so no need for group buys and offer the lowest pricing to WAMAS member family and that's with a 3-year warranty.

    I'd definitely like the layout to match the light I have, so I need to figure out what Reefbreeders used for the 48" as there is a difference between the layout of the it2060 and the photon 24 apparently. Are these fixtures all the same size front to back? Especially the "new" versions? Mine is 8.5".

    125 vs 180?

    in General Discussion

    yes, 180; no questions there. the evergrow 48 won't be enough but you can certainly use it until you figure out your stocking, aquascape, and overall design goals. removing the external optics which are likely 90 degrees and using the LEDs 120 lenses for maximum dispersion and mounting higher will help with coverage. if you're committed to LEDs you can try to sell it and get two it2080s that would cover it very well no matter what you decide to do. some folks like the darker areas of a tank as refuge for fish and corals that might seek it out under cover with appropriate rockscape.

    Is there a 24" Evergrow that is effectively the exact same as the Reefbreeders 24 photon? I know that Reefbreeders sets up there colors a certain way stock. Of course, it's discontinued so I'd have to pick up used or buy a more common Evergrow model if it's capable of the same programming to match the 48" I have.

    125 vs 180?

    in General Discussion

    I would do 180 or 210.  IMO 125's are just an awful dimension.  you will defenetly want more depth than the 18" that a 125g has.

     

    and +1 to what Sun said.

     

     

    As for lighting, I dont think the photon 48 will be enough light for a 6ft tank.  But you can add a photon 24 for cheap and fill in the holes.

     

    And -1 for kessils.  They are very expensive for what you get.  IMO china black boxes are better than kessils.

    How likely would I be able to sync the programming of the 24" photon to the 48"? I just wouldn't want 1/3 of the tank on one side not looking like the other 2/3.

    125 vs 180?

    in General Discussion

    180 all the way; gorgeous dimensions. I miss mine so much. 

     

    They're the same height, so lighting would be the same, but with the 180 you'll have better width to scape with plus more a little more sandbed/swimspace. I wouldn't even think there would be a noticeable difference in maintenance.

     

    I think that would be fine if your corals are centered mostly underneath. You could always get some small, cheap lights to put on the ends so it doesn't look like there's only light in the center in case it ends up looking odd.

    My mistake, I was looking at other sizes also. As it turns out the 180 is actually about 2" deeper than the 125.

    125 vs 180?

    in General Discussion

    I'm considering (in pseudo planning stages) of installing a tank in the wall of my basement, using the utility room as a fish room as there is plenty of piping to tap into if needed and a utility sink if not. I have about 7 feet of length I can cut out of the wall (stupid metal support post prevents a clean 8 feet) This tank would only be view able from the front. What are the pro's and con's of a 125 vs 180 other than the obvious? ie the 125 being deeper requiring stronger lighting or the 180 requiring more maintenance since it has greater water volume. Mainly thinking swimming space (for
    Tangs) and aquascaping (for a minimalist mixed reef) concerns.

     

    My goal is to pick up one of these on the cheap in the next few months when someone breaks down and to re use most of my equipment from my previous tank(s).

     

    Secondary question: Will my Reefbreeders 48" Photon be enough light on a 6 ft tank if I'm not planning on placing corals on the ends? I have the stock colors and optics.

     

    Any other ideas are welcome!

    Salt water vs polished and stained concrete

    in General Discussion

    That said, I have spilled tons of saltwater in my basement, just a polished concrete floor, and no damage

    So are you suggesting that provided it's not sitting on the ground for a long time and is pretty much immediately wiped up, I shouldn't see crumbling floors.  My main concern is splashing behind the tank that I may not see and/ or reach and that turning into a problem eventually.

    Salt water vs polished and stained concrete

    in General Discussion

    A polished floor will absorb everything that is spilled on it and certain things may remove the finish itself.  We have polished concrete floors at the museum I run and you can see every last thing that was spilled on the floor as it leaves a residue behind.  We also have a marking left from a vinyl sign that was placed on the floor where all of the polish was essentially ripped off and left behind what looks like a watermark.  If it's sealed that might help a bit, but I believe ours were polished and then sealed and they still absorb pretty much everything.  I would pour water on your floor and then let it sit for a few minutes before wiping it up.  If you can see where the water was, you can bet that you'll experience staining on the floor when saltwater spills on it.

    http://i1310.photobucket.com/albums/s650/djplus11/IMAG0078_zpspwf0xoij.jpg

     

    As you can see in the pic, there already is a "stain" on the stained concrete, lol from the previous owners.

     

    Now that I moved in, it doesn't appear to be "polished", just stained and sealed. My concern is less with the discoloration, but the crumbling of the concrete itself, when assaulted by saltwater from leaks, spills, etc. Talk to most about using salt on their concrete sidewalks and you'll generally hear that the concrete started crumbling into a huge mess. Definitely DONT want that in the house.

    Best way to clean my sump??

    in General Discussion

    What's the maintenance like on the bucket head?

    How fast does it draw water out - how quick does it fill the 5g bucket?

    I used a bucket head for draining other kind of tanks and it fills the 5 gallons in like 30 seconds. It's a real shop vac that just happens to sit on a 5 gallon bucket. Cheap enough that you can buy one for reef only and not worry about getting contaminants from other cleanups in your system.

    Salt water vs polished and stained concrete

    in General Discussion

    Thinking about setting up the RSM in the basement. Still curious about any real world experience anyone has with saltwater and stained concrete. I know that salt water swimming pool decks are usually sealed with a special sealer to prevent damage, but they are under constant splashing,etc. I don't want my floors breaking apart after a few months of water change splash over.

    Selling order?

    in General Discussion

    good luck!

    Thanks Scott. You're an "officer", where should I list this stuff? As a getting out thread on the "General Discussion" or keep it all in the "For Sale" section? Just don't want to miss out on buyers that aren't paying members over the next 30 days or so.

    Selling order?

    in General Discussion

    So I assume that a bunch here have had to deal with the hassle of selling off set ups for whatever reason. And barring a poor appraisal or the place catching fire, I will be moving in a month to Sykesville. Not worth trying to transport livestock with the weather being cold and moving duties and probably a good opportunity to take a break. The question I have is what is the best order to sell livestock?

     

    My concerns are trying to sell someone a fish that I can't catch easily. Is it better to try to sell off a bunch of corals, liverock and corals attached to liverock first, and then have a nice open space to catch the fish, or is this going to somehow be bad news for the fish?

     

    Clearly tanks and equipment go last, so I've got that down. Any other ideas will be greatly appreciated.

    Should I keep 1 tank?

    in General Discussion

    Appreciate all of the answers. Either way, I'm def selling the 72 gallon bow and sump and most pumps, etc. Got alot of small gear that I might keep just because they're small, but also because I don't want to go out and buy stuff like dosers again when I have them BNIB. Probably selling the 14g Biocube unless it just makes more sense to keep it for future use as it's also pretty easy to move. Considering keeping the LED's for a while as I saved the shipping box and that's easily reusable. 

×
×
  • Create New...