Jump to content

MBVette

BB Participant
  • Posts

    2,390
  • Joined

  • Last visited

Posts posted by MBVette

  1. I'm going to need to many elbows in this setup. It's only 1 more elbow than I use on the 220 with the sump directly underneath the tank. But I will make sure to use them sparingly.

     

    So I heard back from reeflo today and they recommend the swordtail pump. At 10' of head its almost 1200 gph so I think that will be more than sufficient for what I'm looking at.

     

    And the pump is pretty energy efficient using an average of 155 watts

  2. Ok so I measured it out and I am looking at an 11' head night using a 4' stand on the sump and guesstimating the plumbing going to the top of the tank at 5'

     

    So do you think the super dart will work. Reeflo says at 12' there is 1150 gph. So it should be more than enough correct?

  3. Its only one floor.  I have not measure anything yet.  But from the basement floor to the celing is about 9' then a couple more feet to get through to the main floor, then all the way up to the top of the tank would be about another 5'??  So I was rounding up at the highest but I would say w/o measuring we would be looking at most 20', but probably more than likely 15-16'.  Does that not sound right?  I know I need to firm up measurements on things but 20' while a bit much is on the conservative side when figuring the head distance.

  4. what do you mean by larger pipe.  How big would you run the pipe.  I just looked and for example the yellowtail has a 2" inlet/outlet!  I assume you are not telling me to run bigger, just don't make the pipes smaller than that.  I have always plumbed keeping the pipe as big as possible for as long as possible.

     

    Is that what you are saying?

  5. Hey guys.

     

    So Im working with my brother on building a new setup for him.  He is putting together a 120g tank that is going to have the sump in the basement.

     

    So I am looking at pumps to figure out what is best for him.  He will have about 20' of head pressure on the tank.  I was looking at reeflo and looks like their yellowtail will work.  But what about DC pumps, I don't know much about them so what pump would I be looking at for  a DC pump with that type of head pressure.

     

    Thanks

  6. My anemone split recently and the clone moved to the other side of the tank.  Now the 2 clowns take turns on who stays in which anemone.  But usually at night they wind up sleeping together, they just dont like looking at each other when the lights are on.  lol

×
×
  • Create New...