.OptimusPrime. January 24, 2013 Share January 24, 2013 Anybody have one? What pump are you running it with? The reviews for the MJ1200 BRS recommends are mixed. Some say there's not enough flow and end up going with a mag 3. Any thoughts? Link to comment Share on other sites More sharing options...
JeffG93 January 24, 2013 Share January 24, 2013 I'm running one with the MJ - it works fine. The only problem I had was I didn't clean the top and bottom plugs that hold the media. They have little slots cut in them to let the flow through. Eventually these clogged. I just rinsed them in hot water and scrubbed 'em quick with a toothbrush and all was well again. Link to comment Share on other sites More sharing options...
rainbowfish January 24, 2013 Share January 24, 2013 I use MJ1200, it works well but I have to dial it down. Link to comment Share on other sites More sharing options...
jackers January 24, 2013 Share January 24, 2013 I use a mag 3 but split mine apart, plumbed them using Y fittings with individual ball valves, back to another Y and then into the sump. Much better control that way, and only cost ~$20 extra. Link to comment Share on other sites More sharing options...
Curtis Scott January 24, 2013 Share January 24, 2013 (edited) I have one with a MJ1200 dialed down on it as well. Works great. Edited January 24, 2013 by Curtis Scott Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now