pnchowdary March 30 Share March 30 I am trying to setup a water mixing station with 200 gal plastic tanks. I am hoping to tap directly into the cold water supply line for my water heater and branch it the Rodi supply line. I am trying to figure out what connectors would enable me to go from a 0.5 inch cpvc pipe to a standard rodi tube. I was able to find shark bite connectors that go from 0.5 inch cpvc to 1/2 or 3/8 compression fittings, but unfortunately i could find any connectors to go from this to the standard Rodi tube. I am stuck here for a long time and would greatly appreciate any help that you could offer me in this regard. Link to comment Share on other sites More sharing options...
Jeremy March 30 Share March 30 (edited) Did you see this? https://www.reef2reef.com/threads/hooking-up-rodi-directly-to-water-line.747364/ Edited March 30 by Jeremy Link to comment Share on other sites More sharing options...
pnchowdary March 30 Author Share March 30 Did you see this? https://www.reef2reef.com/threads/hooking-up-rodi-directly-to-water-line.747364/Thank you very much @Jeremy. This is exactly what I was looking for. I will take a look at it. Appreciate your help.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now