-
Posts
526 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Store
Posts posted by molcott
-
-
All set up
Sent from my SM-G975U using Tapatalk -
21 minutes ago, Yachaq said:
Is the seam intended to support significant water pressure? It seems that is probably a frag tank from the picture or a very shallow one but I may be interpreting the perspective incorrectly. Since it is new, any change to contact the manufacturer for a fix?
it is a small frag tank and the manufacturer offered to fix it and even pay to have it shipped back to california but I wanted it up and running so the manufacturer is giving me a 30 dollar credit on a future purchase
-
24 minutes ago, Yachaq said:
Nice tank! Are those AI Hydras?
Nope AI Prime HD's
-
1 hour ago, lowlizard said:
you can try weld on #4 it's like a water type to get into the deep part of the crack. then I believe #16 is the thicker version for the bigger gap. still not comfortable with that go over it with silicon
Awesome thanks
-
yeah get a few more of us out this way and we will have enough for a frag swap when it's safe to do so
-
Got a brand new frag tank and filled it up only to discover a crack in the acrylic. Any ideas on how to fix it?
Sent from my SM-G975U using Tapatalk
-
48 minutes ago, Vacobra1 said:
nice tank welcome to the valley
thanks almost finished setting up my frag tank
-
New house New tank 80 gallon setup finally got my fish moved here last night still a little cloudy from me messing with the rocks a bit
Sent from my SM-G975U using Tapatalk
-
make sure the jagers will fit in your sump the 300w ones are pretty long
-
On 7/10/2020 at 8:08 PM, davelin315 said:
https://photos.app.goo.gl/TcJnXQ8ectr13cZW9
This is my current octopus. Unfortunately she appears to be aging too much and might be on the decline but what a journey it has been so far with her.
Sent from my Pixel 4 XL using Tapatalk
That is awesome thanks for the info too
-
21 minutes ago, YHSublime said:
From what I remember, any kind of octo is hard to keep in captivity. I think @davelin315 tried some a long time ago...
Difficult yes I'm more concerned with coming up with a lid option they can't escape from
-
Has anyone here ever tried to house a pygmy octopus in a biocube?
-
when I had a problem with a bat in my attic it didn't harm my fish any
-
3 minutes ago, pizzaguy said:
I'm with you on that. I usually wipe the store out when I go for lrs food
Sent from my SM-N960U using Tapatalk
I may get into making my own foods as well if I do I will let you know, and I think I know the store you mentioned for other pets but not for saltwater lol I walked in there to check it out and was looking at their saltwater selection and was just like nope
-
3 minutes ago, pizzaguy said:
There isn't any at all unfortunately. I've lived in Winchester most of my life. I have to go out of town for food etc.
Theres a good store for other pets but not saltwater
Right on thanks when I move out that way maybe we could figure out a schedule to cut trips out for picking up supplies
-
I'm moving to WInchester in about a month and was wondering if anyone could suggest a good LFS out that way
-
To be clear I wasn't replacing all the rock just a couple pieces that were completely covered and I am picking up a filefish today thanks guys
-
Awesome!!! Keep up the great work
-
I've got marine pure blocks in the sump and only replacing a few rocks at a time so shouldn't be too big a deal
-
I think I may try replacing most of the rock and get some critters to eat the rest
-
I thought about that but there is alot of aitasia in there
-
well do to my working insane hours and neglecting my tank it has been completely overrun by aiptasia so I think I may pull all the fish out and start a new tank
-
Fragfest is on Sunday
Sent from my SM-G975U using Tapatalk -
18 hours ago, Origami said:
Hey, Martin. How have you been? (I've got a job for you if you're up for it. )
I'm good tired but good down to only working about 70 hours a week now
3d printing filaments
in Do It Yourself
are there any good fish safe filaments that are easier to print with than PETG?